Description
When you run a magnified optic, cranking up on close targets or dealing with a dead battery on a red dot can cost you time. The Troy 45 Degree Folding Offset Sight Set solves that with a canted front and rear that sit 45 degrees off your top rail. A quick roll of the rifle to one side puts you behind a full set of irons, then you roll back to the glass for distance work. It's one of the cleaner answers to the offset backup question, and Troy has been doing it long enough that the design is dialed in.
What Sets the Troy 45 Degree Offset Sights Apart
This set pairs a standard M4-style front post with Troy's Di-Optic Aperture rear, which is the piece most people are buying it for. The dual aperture gives you two settings, one tuned for closer work and a second for stretching things out, and the optically engineered opening naturally centers your eye faster than a plain round hole. Both sights fold down low when you don't need them so they stay out of the way of your primary optic and don't snag on gear.
Build and Mounting on the Troy Offset Sight Set
The bodies are machined from hardened 6061-T6 aircraft aluminum with stainless steel internals, then finished in mil-spec hardcoat anodizing. A stainless cross-locking system is what keeps each sight locked upright and holding zero through recoil and rough handling. The ambidextrous base positions the apertures at factory height, so they line up correctly with standard AR sighting geometry and integrate cleanly alongside a scope. Guys who run these tend to praise the solid lock-up and repeatable zero, and it's earned a strong reputation with military and law enforcement users over the years.
One thing worth knowing before you buy: these are built for same-plane rail setups. If your gas block rail sits higher or lower than your receiver rail, this isn't the right fit. On a flat-top receiver or a matched free-float handguard, they'll bolt right up, and a front sight tool makes install quick. Made in the USA and finished in black to blend in with just about any build.
Key Specifications
- Manufacturer: Troy Industries
- Manufacturer Part Number: SSIG-45S-MDBT-00
- Model: 45 Degree Offset BattleSight Set
- UPC: 812441020352
- Front Sight: M4-Style Folding Front
- Rear Sight: Di-Optic Aperture (DOA) Folding Dioptic Rear
- Offset Angle: 45 Degrees
- Base: Ambidextrous, Picatinny-Compatible
- Material: Hardened 6061-T6 Aircraft Aluminum with Stainless Steel Components
- Finish: Mil-Spec Hardcoat Anodized
- Color: Black
- Style: Flip-Up / Folding Back-Up
- Illumination: Non-Illuminated
- Platform: AR-15 / AR-10 Flat-Top
- Country of Origin: Made in the USA
What’s Included
- Troy 45 Degree Folding Offset Front BattleSight (M4-style)
- Troy 45 Degree Folding Offset Rear BattleSight (Di-Optic Aperture)
- Mounting hardware
Frequently Asked Questions
What optics does the Troy 45 Degree Offset Sight Set work with?
It's designed to run alongside a magnified optic like an LPVO or a fixed-power scope. The offset irons sit 45 degrees off your top rail, so you can roll the rifle to switch to irons for close targets without touching your primary optic. The apertures sit at factory height for correct alignment.
Will these Troy offset sights fit a rifle with a raised gas block rail?
No. Troy builds this set for same-plane rail systems only, meaning your handguard rail and receiver rail need to sit at the same height. If your gas block rail is taller or shorter than the receiver, the front and rear won't line up correctly.
What's the difference between the Di-Optic rear and a standard round aperture?
The Di-Optic Aperture (DOA) uses two optically engineered openings with two range settings, one for closer shots and one for reaching out farther. The shape naturally draws your eye to center faster than a plain round hole, which speeds up target acquisition. It pairs with the M4-style front post in this set.
Are the Troy 45 Degree offset sights durable enough for hard use?
Yes. They're machined from hardened aircraft aluminum with stainless steel internals and finished in mil-spec hardcoat anodizing. A stainless cross-locking system keeps each sight locked upright and holding zero, which is why they've long been a favorite among military and law enforcement users.





Reviews
There are no reviews yet.