$244.99
11 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The TriggerTech Rem 700 Special is the sweet spot in TriggerTech's Remington 700 lineup. It sits a step above the Primary model, adding some hand refinements and a wider adjustment range that make it a favorite for hunters and precision folks who want a real upgrade without jumping to the top-tier Diamond. Drop it into any right-handed Rem 700 or compatible clone action and you get a sealed, plug-and-play unit that just works.
The heart of it is TriggerTech's Frictionless Release Technology, which swaps the usual sliding friction for a free-floating roller between the sear and the release. That's what gives you the true zero-creep break with sub .015 inch overtravel and a reset that's short and positive. Because the system doesn't rely on polishing, coating, or lube on the engagement surfaces, the pull feel stays the same from the first shot through thousands of rounds. Plenty of folks note the break feels lighter than the number on the scale, roughly a half pound lighter than a friction-based trigger set to the same weight.
Pull weight adjusts externally from 1.0 to 3.5 lbs using CLKR technology and a single accessible set screw, moving in roughly 1-ounce clicks. That means you can fine-tune it right on the bench, and with the right stock relief you can tweak it without pulling the barreled action. Keep in mind pull weight is tied to your firing pin spring, so a heavy aftermarket spring can push readings past the listed range.
The housing is anodized 7075-T6 aluminum and the key internals are hardened 440C stainless steel, so corrosion resistance and service life are strong points. The external components wear a PVD black finish for a clean, durable look. This Special comes as a curved single-stage lever with the integrated bolt release, which is what you want for a factory Remington action. Running a clone with a receiver-mounted bolt release? The tab pops off easily so it plays nice there too. It's a solid pick for benchrest, long-range hunting, F-Class, varmint work, and target shooting in rough conditions.
It's built for right-handed Remington 700 actions and drops right in as a sealed, plug-and-play unit. It also works on Rem 700 clone actions. This version includes the integrated bolt release, which is what you want on a factory Remington action.
The Special is an upgraded version of the Primary that adds some hand refinements to further enhance accuracy and precision. Both share the same zero-creep break and drop-in design, but the Special is the step up most shooters reach for when they want a noticeable improvement without going all the way to the Diamond.
No problem. If you're running a clone action with the bolt release built into the side of the receiver, you don't need the trigger's release. The tab on this trigger pops off easily, just be careful with the e-clip when you remove it.
That comes down to the Frictionless Release Technology and the exceptionally crisp break. Because there's no sliding friction fighting you, most shooters report the pull feeling around a half pound lighter than a friction-based trigger measured at the same weight. Keep in mind your firing pin spring weight also affects the actual pull, so a heavy spring can bump readings above the listed range.
| UPC | 885768000246 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | R70-SBB-13-TBC |
| Color | Black |
| Model | |
| Product Type | Trigger |
| Shipping Weight | 0.325 |
| Style | Single-Stage |
You must be logged in to post a review.
Reviews
There are no reviews yet.