Description
Swapping your factory Remington 700 trigger for the TriggerTech R700 Special is one of those upgrades that changes how a rifle shoots the second you feel it break. This right-hand, single-stage unit uses TriggerTech's Frictionless Release and CLKR technology to give you a clean, zero-creep break with almost no overtravel. Because the release runs on a free-floating roller instead of sliding, coated engagement surfaces, the pull stays consistent shot after shot, even after thousands of rounds and out in nasty weather. Plenty of folks who run one report the break feels lighter than the number on the gauge, which makes precision work a lot more forgiving.
What Sets the R700 Special Apart from the Primary
The Special is the step up from TriggerTech's Primary model, adding some extra hand refinement for a bit more polish where it counts. Pull weight adjusts externally from 1.0 to 3.5 pounds in roughly one-ounce increments using a single accessible set screw, so you can fine-tune it without stripping the action down. The housing is 7075 aluminum with a natural stainless finish, and the internals are hardened 440C stainless steel for corrosion resistance and a long service life. There's also a removable safety built in.
Fitting the R700 Special to Your Rifle
This one is the curved lever version in silver, right-handed, and configured without a bolt release. That matters: if your action already has a bolt release on the side of the receiver (common on many Rem 700 clone actions), this is the version you want. On a standard factory Remington 700 with the release up in the trigger guard, you'll just slide a thin blade or pick along the bolt to drop it out when you need to remove it. Installation is a genuine drop-in job for most 700-pattern rifles, usually done at the bench in well under half an hour with a punch and a little care.
Whether you're building a precision rig, tightening up a hunting gun, or chasing groups at the range, the R700 Special is a proven, no-nonsense upgrade backed by TriggerTech's lifetime warranty.
Key Specifications
- Manufacturer: TriggerTech
- Model: Special
- MPN: R70-SBS-13-TNC
- UPC: 885768000109
- Platform: Remington 700 (right-handed bolt action)
- Trigger Type: Single-Stage
- Lever Shape: Traditional Curved
- Hand: Right
- Bolt Release: Without (no bolt release)
- Pull Weight Range: 1.0 to 3.5 lbs, adjustable in ~1 oz increments
- Adjustment: Externally accessible set screw
- Overtravel: Sub .015 inch
- Housing Material: 7075 aluminum, natural stainless finish
- Internal Components: Hardened 440C stainless steel
- Color: Silver / Stainless
- Warranty: Lifetime
What’s Included
- TriggerTech R700 Special single-stage curved trigger (right hand, no bolt release)
- Instruction manual
Frequently Asked Questions
Will the R700 Special drop into my factory Remington 700?
Yes, it's designed as a drop-in replacement for right-handed Remington 700 actions and most 700-pattern rifles. Most people have it swapped in at the bench in under half an hour with a punch and a bit of patience. No gunsmith fitting is typically required for a standard factory action.
What does 'no bolt release' mean on this trigger?
This version doesn't include the tab that actuates a bolt stop, so it's the right pick if your action already has a bolt release on the side of the receiver, which is common on Rem 700 clones. On a standard factory 700, you can still remove the bolt by sliding a thin blade or pick along the side to depress the stop. If you want the trigger to handle bolt release for you, look for the 'with bolt release' version instead.
How light can I set the R700 Special pull weight?
Pull weight adjusts from 1.0 to 3.5 pounds in roughly one-ounce increments using an externally accessible set screw, so you don't have to disassemble anything to fine-tune it. Keep in mind that actual pull weight is influenced by your rifle's firing pin spring, so an overweight spring can push the numbers a bit higher than advertised. Many shooters find the crisp, frictionless break feels lighter than the gauge reading.
Why choose the Special over the TriggerTech Primary?
The Special is the upgraded model above the Primary, with additional hand refinements for a slightly more polished feel and finish. Both share the same zero-creep Frictionless Release design and hardened 440C stainless internals, so you're getting the same core reliability either way. If you want that extra bit of refinement for precision or competition work, the Special is the step up.





Reviews
There are no reviews yet.