Description
The Wilson Combat TTU H2 takes the guesswork out of upgrading your AR trigger. It ships as a fully sealed, self-contained cassette, so there are no springs to fumble, no loose pins to lose, and no filing or fitting on your kitchen table. Wilson developed the H2 alongside noted trainer and combat veteran Paul Howe, and the whole point of this one is a two-stage trigger tough enough to light off hard military primers while still snapping back with a positive reset for quick follow-up shots. That extra-power hammer spring is why the pull sits in the 4.5 to 5 lb range rather than the featherweight zone.
What Makes the H2 a Hard-Use Trigger
The internals are H13 heat-treated tool steel across the hammer, sear, and trigger, machined on CNC equipment and EDM cut for tight, repeatable tolerances. The unique hammer geometry is tuned for dependable ignition with all kinds of military and surplus ammo, which is exactly what you want in a duty gun or a range beater that eats whatever you feed it. A 1911-style half-cock notch is baked in, and it's a big reason Wilson calls this one of the safer AR triggers going, meeting or exceeding military drop-safety standards.
Fitting the TTU H2 in Your AR
Installation is genuinely fast. The unit drops into any standard USGI-style lower running .154-inch trigger pins, and you don't even have to pull your safety selector to get it seated. It works across calibers and fits both AR-15 and .308/7.62 length receivers. A couple of things to know before you order: Colt commercial rifles from 1991 to 2009 with .169-inch pins won't work, rifles with pinned-in sear blocks aren't compatible, and guns with a firing-pin safety in the bolt carrier need a different TTU model.
With the wider trigger face giving it a match-grade feel and a break that needs zero adjustment, the H2 is a smart pick for a defensive carbine, a duty rifle, or a hard-use build where you want consistency you can count on shot after shot.
Key Specifications
- Manufacturer: Wilson Combat
- Model: Tactical Trigger Unit (TTU H2)
- Manufacturer Part Number: TR-TTU-H2
- UPC: 874218009182
- Trigger Type: Two-Stage, Drop-In, Semi-Automatic
- Pull Weight: 4.5 to 5 lb
- Action: Semi-Auto
- Material: H13 Heat-Treated Tool Steel
- Construction: CNC Machined and EDM Cut
- Pin Size: GI .154-inch Small Pin
- Fits: AR-15 / AR-10 (.308/7.62) with .154-inch pins
- Safety Feature: 1911-Style Half-Cock Notch
- Finish: Black
- Shipping Weight: 0.25 lb
What’s Included
- Wilson Combat TTU H2 pre-assembled two-stage trigger unit (self-contained module)
Frequently Asked Questions
Is the TTU H2 hard to install?
Not at all. The TTU H2 comes as a pre-assembled, self-contained cassette that drops into a standard AR lower in about a minute using the factory trigger pins. You don't need special tools and you don't have to remove your safety selector, and there are no loose springs or small parts to keep track of.
What pull weight does the H2 trigger have?
The TTU H2 is set at the factory to break between 4.5 and 5 pounds, with no adjustment or tuning needed. That slightly heavier two-stage weight is intentional, since the extra-power hammer spring is what gives it reliable ignition and a positive reset for fast follow-up shots.
Will the TTU H2 fit my AR-10 or .308 build?
Yes, as long as your lower uses standard USGI-style .154-inch trigger pins, the H2 works in AR-15 and .308/7.62 length receivers regardless of caliber. A few exceptions apply, including Colt commercial rifles with .169-inch pins, rifles with pinned-in sear blocks, and guns with a firing-pin safety in the bolt carrier, which need a different TTU model.
Why choose the H2 over a lighter competition trigger?
The H2 was built with Paul Howe specifically for hard-use and duty work rather than pure precision. Its heavier hammer spring reliably ignites stiff military and surplus primers, and the 1911-style half-cock notch meets or exceeds military drop-safety standards, making it a dependable choice for a defensive or duty carbine.






Reviews
There are no reviews yet.