Description
The Magpul MS3 Single QD Sling GEN2 gives you two slings in one. Run it as a one-point when you need speed and freedom to swing your rifle across your body, or convert it to a two-point when you want the muzzle controlled and the weight settled across your back. The Paraclip shackle handles those transitions fast, so you can adapt to whatever position or terrain you find yourself in without stopping to swap gear. This is the coyote tan version with a generous 48 to 60 inch adjustment range that fits nearly any body type, plate carrier, or winter layers.
What Sets the MS3 Single QD Apart
The big difference between this and the standard MS3 is the rear attachment. Instead of a second Paraclip, the Single QD uses a heavy-duty push-button QD sling swivel for the one-point rear mount. That means it drops straight into the QD sling cups you already have on your lower receiver, receiver end plate, or buttstock. Up front, it plays nice with the Magpul RSA, MSA, and Forward Sling Mounts, plus most snap-hook style loops and standard or QD swivels when you set it up as a two-point.
Hardware and Webbing You Can Beat On
Magpul makes all the hardware in-house now, using a mix of reinforced polymer and steel. The Paraclip lever is case hardened and treated with a nitrocarburizing process, so wear and corrosion aren't going to be a problem even after a lot of rough handling. The custom 1.25 inch nylon webbing is strong, chafe-resistant against your neck and shoulder, and carries a Near Infrared treatment to cut down its IR signature. There are no dangling tails or loops to snag on gear.
Dialing In the Fit
The low-profile MS1 slider is the heart of the two-point adjustment. Grab it with your support hand, push down to cinch the rifle tight, pull up to loosen it for shooting, all with one hand and without the slider slipping on you. GEN2 also added extra webbing length compared to older versions, which is why it works so well over armor and heavy clothing.
Key Specifications
- Manufacturer: Magpul Industries
- Model: MS3 Single QD Sling GEN2
- Manufacturer Part Number: MAG515-COY
- UPC: 873750010717
- NSN: 1005-01-657-7616
- Color: Coyote
- Configuration: Convertible one-point / two-point
- Rear Attachment: Push-button QD sling swivel
- Front Attachment: Paraclip (RSA, MSA, Forward Sling Mount, snap-hook, QD)
- Webbing Width: 1.25 inches
- Webbing Material: Nylon with Near Infrared (NIR) treatment
- Adjustment Range: 48" – 60"
- Adjuster: Low-profile MS1 Slider
- Origin: Made in USA
What’s Included
- Magpul MS3 Single QD Sling GEN2 (Coyote Tan)
- Push-button QD sling swivel
- Paraclip attachment
- Usage instructions
Frequently Asked Questions
How is the MS3 Single QD different from the regular MS3 Sling?
The standard MS3 uses a Paraclip on both ends, while the MS3 Single QD swaps the rear Paraclip for a heavy-duty push-button QD sling swivel. That lets the rear attach directly to the QD sling cups on your lower receiver, end plate, or buttstock. Everything else, including the webbing and front Paraclip, stays the same.
Can the MS3 Single QD run as both a one-point and a two-point sling?
Yes, and that's the whole point of the design. The QD swivel handles the rear one-point mount, and the Paraclip shackle lets you convert to a two-point setup in seconds. Once it's on, you can transition back and forth to match your shooting position or how far you need to carry the rifle.
What do I need to mount the MS3 Single QD to my rifle?
For the rear, you need a QD sling cup on your receiver, end plate, or buttstock. Up front the Paraclip works with the Magpul RSA on railed handguards, the MSA on MOE handguards, the Forward Sling Mount, and many snap-hook style loops or QD swivels. If your rifle doesn't have these already, Magpul makes adapters like the ASAP QD to add a mounting point.
Will the MS3 Single QD fit while wearing a plate carrier or heavy layers?
It should. The GEN2 version added extra webbing length specifically for that reason, and the 48 to 60 inch adjustment range covers most body types with or without armor. The one-handed MS1 slider makes it easy to snug it up or let it out as your setup changes.




Reviews
There are no reviews yet.