0
0

Rugged Suppressors Flash Hider Front Cap 7.62mm Black Steel FC006

UPC: 859383006693

$80.00

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A suppressor takes care of the noise, but if you have ever run a short-barreled 7.62 in low light, you know the fireball can still be very real. That is exactly the problem this cap solves. The Rugged Suppressors Flash Hider Front Cap replaces the standard flat front cap on your Rugged rifle can and adds prongs out front that break up the flash signature before it ever becomes a problem. The difference is most noticeable on shorter suppressors and shorter barrels, where there is less baffle stack doing the work and more unburnt powder lighting up at the muzzle.

Built for Rugged 7.62 Rifle Suppressors

This cap is compatible with the Radiant762, Surge762, Razor762, and Micro30, so if you are running any of Rugged's 7.62 rifle cans, you are covered. Installation is a straightforward front cap swap, no tools beyond what you already use for suppressor maintenance and no changes to your mounting system. It is steel with a black finish that matches the rest of your can, and it weighs in at just 1.4 ounces while adding about half an inch past the face of the standard front cap. You will barely notice it is there until the sun goes down.

Why Run a Flash Hider Front Cap

Micro30 owners in particular tend to grab this one, since that can runs a shorter baffle stack and benefits the most from extra flash mitigation, especially on stubby 7.62×39 and .308 builds. Night hunters, anyone running a can under NODs, and folks who just do not want to get flashed out on an evening range session will all appreciate what this little piece of steel does. It is also a smart spare to keep in the range bag if you rotate one suppressor across multiple rifles and want the option to configure it for the job at hand. Manufacturer part number FC006.

Key Specifications

  • Manufacturer: Rugged Suppressors
  • Manufacturer Part Number: FC006
  • UPC: 859383006693
  • Model: Flash Hider Front Cap
  • Caliber: 7.62mm / .30 Cal
  • Material: Steel
  • Finish: Black
  • Weight: 1.4 oz
  • Added Length: 0.5 in past the face of the standard front cap
  • Compatibility: Rugged Radiant762, Surge762, Razor762, Micro30
  • Product Type: Suppressor Front Cap Accessory

What’s Included

  • Rugged Suppressors Flash Hider Front Cap 7.62mm (FC006)

Frequently Asked Questions

Which suppressors does the Rugged Flash Hider Front Cap 7.62mm fit?

This cap is made for Rugged's 7.62 rifle suppressor line, including the Radiant762, Surge762, Razor762, and Micro30. It replaces the standard front cap on those cans. If you are running a 5.56 Rugged can, grab the 5.56 version instead since bore diameter matters here.

How much does this front cap actually reduce flash?

Quite a bit, especially on shorter setups. Owners running the Micro30 on short-barreled 7.62 rifles report a dramatic reduction in visible flash, since that can has fewer baffles and benefits the most from the pronged cap. On longer cans like the Radiant762 the flash is already tame, but the cap still cleans up what is left for low-light and night use.

Does the flash hider front cap add much length or weight?

Barely. It weighs 1.4 ounces and the prongs extend about half an inch past the face of the standard front cap. On a full rifle setup you will not notice the difference in handling.

Is the front cap hard to install?

No, it is a simple swap. You remove the existing front cap from your Rugged suppressor and thread this one on in its place, the same way you would during routine maintenance. No gunsmithing needed, and you can switch back to the standard flat cap whenever you want.

Additional information

UPC

859383006693

Manufacturer

Manufacturer Part Number

FC006

Caliber/Gauge

7.62MM

Color

Black

Length

1.5

Model

Package Height

1.4

Package Width

1.6

Product Type

Front End Cap

Shipping Weight

0.2

Reviews

There are no reviews yet.

Be the first to review “Rugged Suppressors Flash Hider Front Cap 7.62mm Black Steel FC006”