$84.55
29 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Odin Works Adjustable Low-Profile Gas Block gives you real control over how your AR runs. Instead of the one-size-fits-all approach of a fixed block, it uses a front-facing adjustment screw with a ball-detent system that offers 20 distinct clicks, so you can meter exactly how much gas cycles the action. That means softer recoil, cleaner running, less wear on your bolt carrier, and the flexibility to swap ammo, buffer weights, or bolt carrier groups without turning your rifle into an unreliable mess.
The adjustment screw and detent spring are made from Inconel, a super-alloy chosen for its ability to shrug off the extreme heat and pressure right next to the gas port. Because the ball detent holds each setting in place, you do not need a separate set screw pinning down your gas adjustment. Turn it to the click you want, feel it seat, and it stays put. The block itself is machined from a solid piece of carbon steel rather than cast, then finished in black nitride for solid wear and corrosion resistance. It weighs in right around 2.1 ounces with all the hardware.
This one is built for barrels with a .750-inch gas journal, which is the standard on most medium, M4, and HBAR profile barrels. Measure your journal before you order so you know it drops on clean. The low-profile shape tucks under free-float handguards, and it's sized to sit inside Odin Works forends. Tuning is straightforward: start with the gas open, load a couple rounds, and step the adjustment down one click at a time until the rifle stops locking back on an empty mag, then back it off one position. Most folks land somewhere in the usable middle of the range, which gives you room to adjust later.
Where an adjustable block really earns its keep is behind a can. Suppressors jack up back pressure, dumping extra gas and grit into your face and your action. Dial this block down and you'll cut that blowback, run cooler and cleaner, and get more consistent ejection. It's a favorite for competition builds, suppressor hosts, and 300 Blackout setups where different loads demand different gas.
It's made for barrels with a .750-inch gas journal, which is the common size on most medium, M4, and HBAR profile barrels across AR-15 and AR-10 platforms. Measure your journal at the gas port area before ordering to confirm the fit. If your barrel runs a different diameter, this specific model won't seat correctly.
Start with the gas system fully open, load a couple rounds, and fire to confirm the rifle cycles and locks back. Then close the adjustment one click at a time, checking function each step, until it fails to lock back on an empty mag, and back it off one position from there. The 20-click ball-detent system gives you a wide range, so most setups land comfortably in the middle with plenty of room to adjust later.
No. The ball-detent system locks each of the 20 positions in place on its own, so you simply turn the front-facing adjustment screw to the click you want and it stays put. That's one of the features that sets this block apart from tunable blocks that rely on a locking screw.
Yes, it's a popular choice for suppressed builds. Cans add back pressure that overgasses your rifle, and dialing this block down helps cut blowback, run cooler and cleaner, and keep ejection consistent. It's also handy for switching between suppressed and unsuppressed shooting or tuning around different loads like subsonic and supersonic 300 Blackout.
| UPC | 856205005353 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | GB-ADJ |
| Color | ADJUSTABLE GAS BLOCK 0.750" |
| Length | 7.3500 |
| Model | |
| Product Type | Gas Block |
| Style | Low Profile |
You must be logged in to post a review.
Reviews
There are no reviews yet.