0
0

Spikes Tactical Barking Spider2 Muzzle Brake .308 5/8×24 3.75″

UPC: 855319005983

$121.46

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Spikes Tactical Barking Spider2 takes the classic Krinkov brake and makes it smarter. It threads 5/8×24 for AR-10 and other .308 / 7.62×51 hosts, and its whole reason for existing is pushing muzzle blast, noise, and concussion forward and away from you. On top of that, it builds extra back pressure, which is exactly what a short-barrel or piston gun often needs to run right. It also helps cycle subsonic or weaker ammo more reliably, so it earns its keep on more than just full-length rifles.

What Sets the Barking Spider2 Apart

The body is CNC machined from billet 4140 chromoly and heat treated, then given a black nitride QPQ finish that handles heat and shrugs off corrosion. The standout trick is the blast cone, which is supported at both the front and the rear so it won't sag under sustained rapid fire the way some Krink cones do. It's built to take full-auto and high-volume abuse without complaint.

Modular by Design

This is where the Barking Spider2 really separates itself. The front end unthreads so you can run different caps, attachments, and thread protectors, letting you reconfigure the gun in seconds for whatever you're doing that day. The internals pull out the front while the body stays put on the barrel, which makes cleaning simple and lets you pin the body in place without losing access to the guts. The front also carries an integrated striking surface with wrench slots for easy timing and teardown.

Sizing and Fit for the .308 Barking Spider2

Overall length runs 3.75 inches with a 1.4 inch outside diameter, and the body comes pre-drilled for pinning. That length is set to bring a 14.5 inch barrel up to a full 16 inches when permanently attached. Just confirm your barrel is cut 5/8×24 before ordering, since this .30-caliber version will not fit 1/2×28 threads. Like the rest of the Spikes lineup, it's made in the USA and backed by a lifetime warranty.

Key Specifications

  • Manufacturer: Spikes Tactical
  • Model: Barking Spider2
  • Manufacturer Part Number: SAKB0200
  • UPC: 855319005983
  • Product Type: Muzzle Brake (Krinkov style)
  • Caliber: .308 / 7.62 NATO / .30 Cal
  • Thread Pattern: 5/8"x24 TPI
  • Overall Length: 3.75 in
  • Outside Diameter: 1.40 in
  • Material: Billet 4140 Chromoly Steel (H13 tool steel blast cone)
  • Finish: Black Nitride QPQ
  • Weight (with thread protector): 7.8 oz
  • Weight (with flash cap): 9.2 oz
  • Pre-Drilled for Pinning: Yes
  • Country of Origin: Made in USA
  • Warranty: Lifetime

What’s Included

  • Barking Spider2 brake body (.30 cal)
  • Blast cone
  • Hex front end
  • Thread protector
  • 5-prong Helix flash suppressor end cap

Frequently Asked Questions

Will the Barking Spider2 fit my .308 rifle?

This version is threaded 5/8×24, which is the standard pitch for most AR-10 and .308/7.62×51 barrels. It will not thread onto a 1/2×28 (5.56) barrel, so check your muzzle threads before ordering. If your .30-caliber barrel is cut 5/8×24, you're good to go.

Can I pin and weld the Barking Spider2 to a short barrel?

Yes. The body comes pre-drilled for pinning, and it's sized to bring a 14.5 inch barrel up to a full 16 inches when permanently attached. Because the internals come out the front, you can pin the body to the barrel and still pull the guts for cleaning.

What's the point of the modular front end?

The front cap unthreads so you can swap between the thread protector, the 5-prong Helix flash suppressor cap, and other compatible attachments. That lets you tune the same brake for different jobs in a matter of seconds. It also makes teardown and cleaning quick since you don't have to remove the body from the barrel.

Does the Barking Spider2 add back pressure for short barrels and subsonic loads?

It does. The design intentionally builds back pressure, which helps short-barrel and piston guns cycle more consistently when dwell time is limited. That same back pressure can also improve reliability with subsonic or weaker ammunition.

Additional information

UPC

855319005983

Manufacturer

Manufacturer Part Number

SAKB0200

Caliber/Gauge

.308 / 7.62 NATO

Color

Black

Model

Product Type

Muzzle Brake

Thread Pattern

5/8"x24

Reviews

There are no reviews yet.

Be the first to review “Spikes Tactical Barking Spider2 Muzzle Brake .308 5/8×24 3.75″”