0
0

KynSHOT RB5000HP Hydraulic Recoil Buffer for Over-Gassed AR-15

UPC: 854476005379

$149.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Some AR-15 builds just cycle too hard. Add a suppressor, run a short barrel, crank up an adjustable gas block, or feed it a heavy-hitting cartridge, and all that extra back pressure ends up slamming the bolt carrier around and landing right on your shoulder. The KynSHOT RB5000HP is built specifically for those setups. Instead of the usual aluminum-and-steel weighted buffer, it uses a sealed hydraulic damping system that absorbs the bolt carrier's rearward energy and helps stop bolt bounce as the next round chambers. The result is a calmer, smoother impulse and quicker recovery between shots.

What Sets the RB5000HP Apart From a Standard Buffer

The HP builds on KynSHOT's standard RB5000 with enhanced damping to handle the added back pressure that comes with running a can. KynSHOT rates the felt recoil reduction around 20 to 30 percent, along with a big cut in muzzle flip. That translates to faster second and third shots since the sights don't jump as far off target. It's machined from 17-4 stainless steel, so it shrugs off corrosion and holds up to serious round counts in the kind of demanding conditions that chew up lesser parts.

Where the KynSHOT RB5000HP Fits Best

This one is aimed at over-gassed and suppressed AR-15 carbines, plus larger bore thumpers like .50 Beowulf, .458 SOCOM, and .450 Bushmaster. It also plays nicely with CMMG's 9mm radial delayed blowback system. Worth noting: it's not meant for direct-blowback pistol-caliber carbines, and if you're shooting a lot of subsonic ammo unsuppressed, the softer-tuned RB5000L is the better match.

Dropping the RB5000HP Into Your Rifle

Installation is about as easy as it gets. It's designed for a Mil-Spec carbine buffer tube with a 7-inch internal depth and works with any style buffer spring, so you just pull your old buffer and drop this one in its place. No gunsmithing, no gas system changes. Folks who've run it report a night-and-day difference over a standard heavy buffer, with reduced felt recoil and even quieter spring noise in the tube.

Key Specifications

  • Manufacturer: KynSHOT
  • Model: RB5000HP
  • Manufacturer Part Number: RB5000HP
  • UPC: 854476005379
  • Type: Hydraulic Recoil Buffer
  • Platform: AR-15 Carbine
  • Material: 17-4 Stainless Steel
  • Weight: 4.8 oz
  • Overall Length: 7.85 in
  • Buffer Tube Fit: Mil-Spec Carbine (7 in internal depth)
  • Spring Compatibility: Any style buffer spring
  • Recoil Reduction: Approx. 20-30%
  • Best For: Over-gassed, suppressed, and large-bore AR-15s
  • Also Compatible With: CMMG 9mm Radial Delayed Blowback
  • Color: Silver
  • Made In: USA

What’s Included

  • KynSHOT RB5000HP hydraulic recoil buffer

Frequently Asked Questions

Is the KynSHOT RB5000HP a true drop-in install?

Yes. It's designed as a direct drop-in replacement for a standard carbine buffer and works with any style buffer spring. You just pull your existing buffer and slide the RB5000HP in its place, with no gunsmithing or gas system changes needed. It's built for a Mil-Spec carbine buffer tube with a 7-inch internal depth.

What kind of AR-15 setups is the RB5000HP built for?

The HP is tuned for AR-15s that run hard, meaning over-gassed carbines, suppressed builds, and big-bore cartridges like .50 Beowulf, .458 SOCOM, and .450 Bushmaster. It's also compatible with CMMG's 9mm radial delayed blowback system. If your rifle cycles violently or has an adjustable gas block set high, this is the model that adds the extra damping to settle it down.

Can I use the RB5000HP in a 9mm pistol-caliber carbine?

Not in a standard direct-blowback PCC. The RB5000HP is intended for AR-15s and CMMG radial delayed blowback systems only. For a direct-blowback 9mm build, KynSHOT points you toward the RB5007, RB5015HD, or RB5020SS instead.

How much recoil reduction should I expect from the RB5000HP?

KynSHOT rates it at roughly 20 to 30 percent less felt recoil, along with a major reduction in muzzle flip. In practice that means your sights stay closer to target and follow-up shots come faster. Many users pairing it with a lighter bolt carrier or matched spring report an even bigger improvement in comfort and target reacquisition.

Additional information

UPC

854476005379

Manufacturer

Manufacturer Part Number

RB5000HP

Color

HYDRAULIC RECOIL BUFFER

Length

7.8500

Model

Product Type

Buffer

Reviews

There are no reviews yet.

Be the first to review “KynSHOT RB5000HP Hydraulic Recoil Buffer for Over-Gassed AR-15”