Description
The KynSHOT RB5020SS is a hydraulic recoil buffer built for one thing: getting your PCC back on target quicker. Instead of the mechanical spring-and-weight setup you get with a standard buffer, this one uses a sealed hydraulic piston that soaks up the bolt carrier's rearward energy and spreads that impulse out over time. The result is a softer, gentler shove rather than a sharp mechanical smack, which keeps your dot or irons parked where you left them. KynSHOT developed this model in cooperation with Blitzkrieg Components, and the goal was a longer, heavier buffer aimed squarely at the short-stroke competition crowd.
What the RB5020SS Does to Your Bolt Stroke
The headline feature here is stroke reduction. At 5.3 inches long, the RB5020SS shortens bolt travel by roughly 1.3 inches when you drop it into a standard AR-15 carbine buffer tube. Run it in an AR-10/A5 carbine tube instead and it trims travel by about 0.5 inches, and you can dial that in further by stacking spacers. Less bolt travel means less time between shots, and in a fast stage that adds up. A word on ammo: the damping on this buffer is tuned for lighter, competition-style 9mm loads, which is where it performs best and lasts longest.
Why the RB5020SS Holds Up Round After Round
KynSHOT machines these from high-strength 17-4 stainless steel, so corrosion basically isn't a concern whether you're running wet, dry, or suppressed. The Mil-Spec hydraulic fluid and seals are certified to work from -30F all the way up to +150F, so cold mornings and hot summer matches won't throw it off. Because that hydraulic system also curbs bolt bounce as the next round chambers, you get smoother, more consistent cycling and less pounding on your internals over the long haul.
A quick heads up on setup: this is a purpose-built competition buffer, so it usually wants an A5 tube, the right spring, and sometimes a spacer or a modified bolt to run exactly the way you want. Nail the configuration and it's one of the fastest-feeling PCC setups you can build.
Key Specifications
- Manufacturer: KynSHOT
- Model: RB5020SS
- Manufacturer Part Number: RB5020SS
- UPC: 854476005270
- Type: Hydraulic Recoil Buffer, Short-Stroke
- Caliber: 9mm PCC / AR-9
- Length (Compressed): 5.3 in
- Material: 17-4 Stainless Steel
- Finish: Stainless / Silver
- Bolt Stroke Reduction (AR-15 Carbine Tube): Approx. 1.3 in
- Bolt Stroke Reduction (AR-10/A5 Tube): Approx. 0.5 in, adjustable with spacers
- Operating Temp Range: -30F to +150F
- Fluid & Seals: Mil-Spec Hydraulic
- Best For: Lighter competition-style 9mm loads
What’s Included
- KynSHOT RB5020SS Short-Stroke Hydraulic Recoil Buffer
Frequently Asked Questions
What kind of buffer tube does the RB5020SS need?
This buffer is designed to fit AR-9 style PCCs and works in a standard AR-15 carbine tube, but KynSHOT recommends running it in an A5/AR-10 carbine tube for the best short-stroke setup. Depending on your configuration you may also need the correct spring and one or more spacers to tune it in. If you want the bolt to lock back on an empty mag, an A5 tube with a .308 carbine spring and a spacer is the path KynSHOT points to.
How much does the RB5020SS shorten the bolt stroke?
In a standard AR-15 carbine buffer tube, the 5.3-inch RB5020SS cuts bolt travel by about 1.3 inches. Drop it into an AR-10/A5 carbine tube and it trims roughly 0.5 inches, which you can increase by adding spacers. Less travel translates directly into faster cycling and quicker follow-up shots.
What ammo works best with the KynSHOT RB5020SS?
The damping on this buffer is tuned for lighter, competition-style 9mm loadings, which is where you'll get the smoothest performance and the longest service life. Heavier or hotter loads can push it outside its intended window. For match-focused PCC shooting with lighter ammo, it's right in its element.
How is a hydraulic buffer different from a regular weighted buffer?
A standard buffer relies on a weight and spring, which delivers a sharp mechanical spike at the end of the bolt's travel. The RB5020SS uses a sealed hydraulic piston to absorb the bolt carrier's energy and spread that impulse over time, so you feel a gentle shove instead of a hard smack. It also helps curb bolt bounce as the next round chambers, which smooths out cycling and eases wear on your internals.







Reviews
There are no reviews yet.