Description
The KynSHOT RB5005 takes the sharp, jarring recoil impulse of a large-frame .308 AR and turns it into a smoother, more manageable push. Instead of relying on weight and a spring alone, it uses self-contained hydraulic damping to slow and cushion the bolt carrier as it travels rearward. That means less muzzle flip, less bolt bounce as the next round chambers, and a whole lot less shock traveling back into your shoulder and your optic. For anyone running a heavier-recoiling AR-10, that translates to staying on target through the string instead of fighting the gun back down after every shot.
How the RB5005 Handles Recoil
KynSHOT is a division of KYNTEC, a company that builds kinetic energy management solutions for industrial, aerospace, and defense use, and that engineering shows up here. The RB5005 typically trims felt recoil by 20 to 30 percent while largely eliminating muzzle climb. The real payoff shows up on your second and third shots, where shooters notice quicker target reacquisition and, in a lot of cases, the sight picture barely leaving the scope. Reducing bolt carrier speed and vibration also means less wear on internal parts and less shake reaching your glass.
Fit and Installation of the RB5005
This one is built specifically for AR-10 platforms running an AR-10 length or A5 collapsible stock tube with a 7.75 inch internal depth, and it replaces buffers measuring 3.25 inches. It pairs with any style AR-10 buffer spring you already have, so there is no need to track down a special spring. Measure your tube's internal depth before ordering, since a lot of tubes only run about 7 inches and will not give this buffer the room it needs.
Built to Last
The RB5005 is machined from high-strength 17-4 stainless steel, giving it corrosion resistance and the durability to hold up under heavy, repeated use. It is a straightforward drop-in swap that takes only basic takedown knowledge and a few minutes, with no gunsmithing or permanent changes to your rifle. Proudly designed and manufactured in the USA.
Key Specifications
- Manufacturer: KynSHOT
- Model: RB5005
- Manufacturer Part Number: RB5005
- UPC: 854476005034
- Buffer Type: Hydraulic Recoil Buffer
- Platform: AR-10 / LR-308
- Caliber: 7.62mm / .308 Win
- Compressed Length: 3.25 in
- Tube Compatibility: AR-10 Length / A5 Collapsible (7.75 in internal depth)
- Spring Compatibility: Any AR-10 buffer spring
- Material: 17-4 Stainless Steel
- Color / Finish: Silver / Stainless
- Weight: 5.0 oz
- Felt Recoil Reduction: 20 to 30 percent
- Country of Origin: USA
What’s Included
- KynSHOT RB5005 hydraulic recoil buffer
Frequently Asked Questions
Will the KynSHOT RB5005 fit my AR-10?
It is built for AR-10 and LR-308 rifles running an AR-10 length or A5 collapsible stock tube with a 7.75 inch internal depth, and it replaces buffers that are 3.25 inches long. Measure your tube's internal depth before ordering, since many tubes only run about 7 inches and will not accept this buffer. If your rifle uses a shorter carbine tube or a rifle-length fixed stock, KynSHOT makes different models for those setups.
Do I need a special spring to run the RB5005?
No. The RB5005 works with any style AR-10 buffer spring, so you can reuse the one already in your rifle. That keeps the install simple and saves you from hunting down a proprietary spring.
How much does the RB5005 actually reduce recoil?
Most users see felt recoil drop by around 20 to 30 percent, along with a big reduction in muzzle flip. The hydraulic damping smooths out the whole recoil impulse so it feels more like a steady push than a sharp snap. Results will vary a bit depending on your ammo, barrel length, and gas system.
Is the RB5005 hard to install?
Not at all. It is a drop-in replacement that takes only a few minutes with basic rifle takedown knowledge and no gunsmithing. Pull your existing buffer and spring, then drop in the KynSHOT buffer with that same spring and you are done.






Reviews
There are no reviews yet.