0
0

KynSHOT RB5001 Hydraulic Recoil Buffer for AR-15 Fixed Stock

UPC: 854476005010

$174.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The KynSHOT RB5001 replaces the solid weighted buffer in your fixed stock AR-15 with a self-contained hydraulic system that slows and cushions the bolt carrier as it travels rearward. Instead of letting the carrier slam back and rattle your internals, the RB5001 soaks up that energy and smooths out the whole cycle. The payoff is real: felt recoil drops by roughly 20 to 30 percent, muzzle flip settles down, and follow-up shots come faster because your sight picture doesn't get thrown around. It also prevents bolt bounce as a fresh round chambers, which is one of those small things that adds up to more consistent second and third shot accuracy.

What Makes the RB5001 Tick

Inside is KynSHOT's patented damping technology, filled with Mil-Spec hydraulic fluid and sealed to handle temperature swings from -30F all the way to +150F. The whole unit is machined from high-strength 17-4 stainless steel, which makes it corrosion resistant and tough enough to hold up whether you're running suppressed, unsuppressed, wet, or dry. At 8.3 ounces with an overall length of 6.31 inches (5.88 inches compressed) and a 0.70 inch diameter, it's built to a proven design that's seen heavy use with competition shooters, law enforcement, and the U.S. Armed Forces.

Fitting the RB5001 to Your Rifle

This one is made specifically for AR-15s running a Mil-Spec rifle-length A1 or A2 fixed stock buffer tube with a 9.5 inch internal depth. It's a genuine drop-in job that pairs with any standard rifle buffer spring, so you can swap out your old buffer in about five minutes with no special tools. It's optimized for 5.56 and .223 but runs reliably in other popular chamberings like 300 Blackout, 6.8 SPC, 6.5 Grendel, and .204, and it really earns its keep in heavy hitters like 450 Bushmaster and 458 SOCOM where the extra mass and damping smooth out the thump. It's also rated for full-auto use. One thing to keep in mind: this buffer is not for 9mm builds, which use a different KynSHOT model.

Key Specifications

  • Manufacturer: KynSHOT (KYNTEC)
  • Model: RB5001
  • Manufacturer Part Number: RB5001
  • UPC: 854476005010
  • Product Type: Hydraulic Recoil Buffer
  • Platform: AR-15 with Mil-Spec Rifle-Length A1/A2 Fixed Stock
  • Buffer Tube Depth: 9.5 inch internal depth
  • Primary Caliber: 5.56mm / .223 Remington
  • Material: 17-4 Stainless Steel
  • Weight: 8.3 oz
  • Overall Length: 6.31 in (5.88 in compressed)
  • Diameter: 0.70 in
  • Felt Recoil Reduction: 20 to 30 percent
  • Operating Temperature: -30F to +150F
  • Spring Compatibility: Any standard rifle buffer spring
  • Full-Auto Rated: Yes

What’s Included

  • KynSHOT RB5001 Hydraulic Recoil Buffer

Frequently Asked Questions

Will the KynSHOT RB5001 fit my AR-15?

It's built for AR-15s running a Mil-Spec rifle-length A1 or A2 fixed stock buffer tube with a 9.5 inch internal depth. As long as the buffer you're replacing is a rifle-length A1/A2 rifle buffer, it's a direct drop-in. It works with any standard rifle buffer spring, so there's no need to change out other parts.

How much recoil does the RB5001 actually reduce?

KynSHOT rates it at a 20 to 30 percent reduction in felt recoil, along with a big cut in muzzle flip. The hydraulic damping slows the bolt carrier instead of letting it slam rearward, which keeps your sights settled and speeds up follow-up shots. Many users notice the biggest difference on their second and third shot accuracy.

Can I run the RB5001 with calibers other than 5.56?

Yes. While it's optimized for 5.56 and .223, it also runs well in 300 Blackout, 6.8 SPC, 6.5 Grendel, and .204. It's a strong pick for heavy thumpers like 450 Bushmaster and 458 SOCOM, where the added mass and damping really smooth things out. It is not for 9mm builds, which need a different KynSHOT model.

Is the RB5001 hard to install?

Not at all. It drops in exactly where your old buffer sits and pairs with your existing rifle buffer spring, so the swap takes about five minutes with no special tools. If you've ever changed a standard buffer, you already know the drill.

Additional information

UPC

854476005010

Manufacturer

Manufacturer Part Number

RB5001

Color

HYDRAULIC RECOIL BUFFER

Length

7.9000

Model

Product Type

Buffer

Reviews

There are no reviews yet.

Be the first to review “KynSHOT RB5001 Hydraulic Recoil Buffer for AR-15 Fixed Stock”