0
0

Anechoic DTA .578×28 Titanium Direct Thread Adapter, HUB 1.375×24

UPC: 850059666258

$100.30

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Threaded barrels come in a lot of flavors, and .578×28 is the go-to pitch for most .45 caliber pistols and plenty of large-bore hosts. The Anechoic DTA .578×28 bridges that gap, letting you spin your AnechoX suppressor straight onto a .578×28 muzzle without any extra mounting hardware in between. It threads into the 1-3/8×24 HUB interface that AnechoX cans are built around, which also means it plays nice with just about any other suppressor sharing that industry-standard thread.

Titanium Where It Counts

Anechoic machines this DTA from titanium, and that choice pays off two ways. First, the whole adapter weighs in around 0.8 ounces, so it keeps your setup light and balanced instead of hanging extra steel off the muzzle. Second, titanium shrugs off the repeated install-and-remove cycles that direct thread mounts live through, holding its threads tight over the long haul. The matte black finish keeps things subdued at the muzzle and blends in with most host guns and suppressor finishes.

Why Go Direct Thread with the DTA .578×28

Quick-detach mounts have their place, but a direct thread setup is simpler, lighter, and often more consistent for accuracy since there are fewer parts between the barrel and the can. If your suppressor mostly lives on one host, this is the cleaner way to run it. Swapping between barrels with different thread pitches is easy too, since Anechoic offers the DTA in a full range of common patterns, so one can cover multiple guns in the safe.

Getting the Anechoic DTA Installed Right

Proper torque matters on a direct thread mount, and this adapter is designed to be installed with the AnechoX DTA wrench, which is sold separately. One note on compatibility: this adapter works across the AnechoX suppressor lineup with the exception of the AnechoX 22, so rimfire folks will want to double check their setup before ordering. For everything else wearing a 1-3/8×24 thread, this little piece of titanium gets the job done.

Key Specifications

  • Manufacturer: Anechoic
  • Manufacturer Part Number: DTA-57828
  • UPC: 850059666258
  • Model: Direct Thread Adapter (DTA)
  • Product Type: Suppressor Mount
  • Barrel Thread Pitch: .578×28
  • Suppressor Thread Interface: 1-3/8×24 (HUB)
  • Material: Titanium
  • Finish: Matte Black
  • Weight: 0.8 oz
  • Compatibility: AnechoX suppressors except the AnechoX 22
  • Installation Tool: AnechoX DTA wrench, sold separately

What’s Included

  • Anechoic DTA .578×28 Direct Thread Adapter

Frequently Asked Questions

Will the Anechoic DTA .578×28 work with my .45 ACP threaded barrel?

That is exactly what this thread pitch is for. The .578×28 pattern is the standard thread on most .45 caliber threaded pistol barrels, so this adapter lets an AnechoX or other HUB-compatible suppressor mount directly to those hosts. Just confirm your barrel is threaded .578×28 and you are set.

Do I need a special tool to install this direct thread adapter?

Yes, Anechoic specifies the AnechoX DTA wrench for installation, and it is sold separately. Using the correct wrench lets you seat the adapter with proper torque and alignment, which matters a lot for both accuracy and keeping the adapter from backing out under fire.

Does the DTA .578×28 fit suppressors from other brands?

It fits any suppressor built on the industry-standard 1-3/8×24 HUB thread, which covers a wide range of modern cans beyond the AnechoX line. If your suppressor accepts HUB mounts, this adapter will thread right in. The one exception in Anechoic's own lineup is the AnechoX 22, which does not use this adapter.

Why choose titanium for a suppressor thread adapter?

Titanium gives you a great strength-to-weight ratio, which is why this adapter comes in at only 0.8 ounces. It holds up well to heat and repeated mounting cycles without adding noticeable weight at the muzzle. That keeps your host gun balanced, especially on pistols where every ounce out front is felt.

Additional information

UPC

850059666258

Manufacturer

Manufacturer Part Number

DTA-57828

Model

Product Type

Mount

Reviews

There are no reviews yet.

Be the first to review “Anechoic DTA .578×28 Titanium Direct Thread Adapter, HUB 1.375×24”