Description
If you run an MCX Spear LT and want your weapon light sitting where it belongs instead of hanging off a chunky rail adapter, this is the piece you've been missing. The Arisaka Offset Scout Mount is a patented, purpose-built solution that replaces the stock Picatinny rail section and mounts your scout light directly to the M-LOK handguard. The result is a cleaner, tighter setup that trims bulk and puts the light right where your thumb naturally lands.
What the Spear LT Offset Scout Mount Actually Does for Your Setup
Mounted at the 3 or 9 o'clock M-LOK slots, the mount hugs the handguard closely and drops the light to a 45-degree offset angle. That angle keeps the head out of your support-hand grip while still leaving room up top for aiming devices. There's enough clearance for common laser units like the ATPIAL-C, PEQ-15, DBAL-A2, and NGAL, so you're not forced to choose between a light and a laser. It also has a neat trick up its sleeve: flip it over onto the angled M-LOK slots and it plays nicely with the MAWL, with the light riding below.
Dialing In Your Light with Three Lateral Positions
One of the smarter features here is the three lateral mounting positions, spanning roughly 0.240 inches. That small range gives you real say in how close or far the light sits from your top rail, front sights, or whatever else is crowding the space. Run an Arisaka 300 or 600 Series light body and you can free up even more room for taller front sights.
Built Tough and Widely Compatible
The mount is CNC machined from 6061-T651 aluminum and finished with Type III hard coat anodizing in Flat Dark Earth, so it's light, corrosion resistant, and made in the USA. Compatibility is broad: Surefire M300 and M600 series, Modlite PLH, PLHv2 and OKW, Streamlight ProTac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin and Odin Mini, CD REIN, and Arisaka's own 300, 600, and 18650 series. Beyond the Spear LT, it also fits Aero Precision Enhanced Gen 2 handguards.
Key Specifications
- Manufacturer: Arisaka Defense
- Manufacturer Part Number: OSM-SPEAR-FDE
- UPC: 850036188568
- Color / Finish: Flat Dark Earth, Type III Hard Coat Anodized
- Material: 6061-T651 Aluminum, CNC Machined
- Attachment Interface: M-LOK
- Designed For: SIG MCX Spear LT Handguard (also fits Aero Precision Enhanced Gen 2)
- Light Offset Angle: 45 Degrees
- Lateral Positions: Three positions, approx. 0.240 in span
- Light Compatibility: Surefire M300/M600, Modlite PLH/PLHv2/OKW, Streamlight ProTac RM 1/2 & HL-X (non-laser), Olight Odin/Odin Mini, CD REIN, Arisaka 300/600/18650
- Country of Origin: Made in USA
- Product Type: Weapon Light Mount
What’s Included
- Offset Scout Mount (FDE)
- Two M-LOK nuts
- Two 10-24 x 5/16" Torx button head screws
- Two 8-32 x 3/8" Torx flat head screws
Frequently Asked Questions
Will the Arisaka Offset Scout Mount fit my MCX Spear LT handguard?
Yes, this version is engineered specifically for the SIG MCX Spear LT M-LOK handguard profile. It also works well with Aero Precision Enhanced Gen 2 handguards. If you have a different handguard, Arisaka makes other versions of the Offset Scout Mount for those profiles.
What weapon lights work with this mount?
It accepts a wide range of scout-style lights, including the Surefire M300 and M600 series, Modlite PLH, PLHv2 and OKW, Streamlight ProTac Rail Mount 1 and 2 and HL-X (non-laser), Olight Odin and Odin Mini, CD REIN, and the Arisaka 300, 600, and 18650 series. Surefire M620, M951/2, and M961/2 lights can also be used by adding the separate Arisaka Offset M620 Adapter.
Can I still run a laser on my top rail with this mounted?
You can. When installed at the 3 or 9 o'clock M-LOK slots, the mount hugs the handguard while leaving clearance for common top-rail lasers like the ATPIAL-C, PEQ-15, DBAL-A2, and NGAL. The three lateral positions also let you fine-tune spacing around your other accessories.
What tools do I need to install the Offset Scout Mount?
Installation calls for an IP20 TorxPlus driver, and a T9 Torx driver is needed to remove the stock Picatinny mount from a Surefire Scout light. Arisaka recommends torquing the M-LOK screws to 30 inch pounds and the light body screws to 20 inch pounds with a thread locker like Loctite 222 or 243. The drivers are not included.






Reviews
There are no reviews yet.