Description
Most two-stage triggers share the same internal parts across both stages, and that shared geometry is exactly why so many of them feel a little mushy right before the break. Rise Armament went a different direction with the ICONIC. This one uses completely separate mechanical components for each stage, so the first stage does its job, then hands off to a second stage that breaks like a high-end single-stage. You get the awareness and control of a two-stage with the snap and speed of a single-stage in one package, and it earned a 2022 Ballistic's Best Award in the AR trigger category to back that up.
What Sets the ICONIC Two-Stage Trigger Apart
The pull breaks down to roughly a 1.25 lb first stage and a 1.75 lb second stage for a 3 lb total, though Rise sets each unit for peak performance and notes it can vary about a quarter pound per stage. The first stage rides on a wide, gently curved blade that gives your finger more than a quarter inch of contact for real control, while the skeletonized second-stage blade delivers a defined wall and a clean break with virtually no creep or overtravel. The two blades are designed to nest and slide together rather than collide, which is a big part of why the reset feels so quick and clear.
Built to Last and Easy to Drop In
Internals are machined from S7 tool steel and heat-treated for hardness, then paired with a 6061 aerospace-grade aluminum cassette housing. StrongArm hammer springs help ensure reliable ignition across ammo types, and the whole thing installs as a self-contained drop-in unit with anti-walk pins included. It fits mil-spec AR-15 and AR-10 lowers chambered in the usual suspects like .223/5.56, .308, and 6.5, and works with both 90-degree and 45-degree safety selectors.
Rise also builds in a Safety-First Hammer Hold that can catch the hammer if the rifle is dropped, and every ICONIC is made in Broken Arrow, Oklahoma and backed by a lifetime warranty.
Key Specifications
- Manufacturer: Rise Armament
- Model: ICONIC Independent Two-Stage Trigger
- Manufacturer Part Number: T22-GRY
- UPC: 850011713303
- Color / Finish: Graphite Gray
- Trigger Type: Independent Two-Stage, Drop-In
- First Stage Pull: Approx. 1.25 lb
- Second Stage Pull: Approx. 1.75 lb
- Total Pull Weight: Approx. 3 lb
- Internal Material: S7 Tool Steel, Nitride Finish
- Housing: 6061 Aerospace-Grade Aluminum Cassette
- Hammer Springs: StrongArm
- Compatibility: Mil-Spec AR-15 and AR-10
- Made In: Broken Arrow, Oklahoma, USA
- Warranty: Lifetime
What’s Included
- ICONIC Independent Two-Stage Trigger (Graphite Gray)
- Anti-walk trigger and hammer pins
Frequently Asked Questions
Will the ICONIC Two-Stage Trigger fit my AR-15 and AR-10?
Yes. It is designed to drop into any mil-spec AR-15 or AR-10 lower receiver with standard dimensions. It covers the common calibers you would expect, including .223/5.56, .308, and 6.5. If your lower is true mil-spec, installation is straightforward.
What is the actual pull weight on the ICONIC trigger?
The first stage runs about 1.25 lb and the second stage about 1.75 lb, for roughly a 3 lb total pull. Rise tunes each trigger individually for performance, so the numbers can shift about a quarter pound per stage. You still pull through the first stage to hit the wall before the crisp second-stage break.
Does this trigger work with 45-degree safety selectors?
It does. The ICONIC is compatible with both standard 90-degree and short-throw 45-degree safety selectors. That gives you flexibility if you are running an ambidextrous or aftermarket selector in your build.
Is the ICONIC hard to install?
Not at all. It ships as a self-contained drop-in unit, so there is no fiddling with loose springs or timing individual parts. The included anti-walk pins lock it in place and keep it secure through heavy use, and most folks can knock out the swap in a few minutes with basic tools.






Reviews
There are no reviews yet.