0
0

YHM Long sRx Flash Hider 1/2-28 TPI Black Phosphate QD Muzzle Device

UPC: 841812101543

$84.75

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone who runs a suppressor knows the frustration of carbon-caked mounts and QD systems with more moving parts than a pocket watch. Yankee Hill Machine took a different route with the sRx line, and this Long sRx Flash Hider in 1/2-28 is a great example of keeping things simple. It threads onto your 5.56 muzzle like any standard flash hider, then works with the YHM sRx Adapter to give you fast, repeatable suppressor mounting without levers, springs, or ratchet teeth to wear out.

How the sRx Flash Hider Keeps Threads Clean

The smart part of this design is the large taper machined in front of the threads. When your suppressor locks down over it, that taper forms a tight seal that keeps hot gas and carbon from creeping onto the threads during firing. Less fouling on the mount means less wrestling when it is time to pull the can off after a long range day, and it helps your suppressor return to the same position shot after shot. Since there are no moving parts, there is nothing to gunk up or break, and the whole setup stays lighter than a lot of the QD mounts on the market.

Fitting the Long sRx Flash Hider to Your Rifle

This is the long version, measuring 2.30 inches overall with a 0.9375 inch outer diameter, and it adds about 1.675 inches to a barrel with standard 0.6 inch thread length. The 1/2-28 thread pattern covers most 5.56 NATO and .223 Rem barrels, and the steel construction with a black phosphate finish holds up well against heat and weather. Keep in mind the QD function requires the YHM sRx Adapter (YHM-4400), which attaches to any suppressor with the industry standard HUB 1-3/8×24 thread pitch. That opens the door to a huge range of cans beyond just YHM models. When the suppressor is off, it still does its day job of taming muzzle flash. Made in the USA by a shop that has been machining quality parts for decades.

Key Specifications

  • Manufacturer: Yankee Hill Machine
  • Manufacturer Part Number: YHM-4405-28
  • UPC: 841812101543
  • Model: sRx (Long)
  • Thread Pattern: 1/2"-28 tpi
  • Caliber: .223 Rem / 5.56 NATO
  • Overall Length: 2.30 in
  • Length Added to Barrel: 1.675 in (with 0.6 in threads)
  • Outer Diameter: 0.9375 in
  • Material: Steel
  • Finish: Black Phosphate
  • Suppressor Interface: YHM sRx Adapter (HUB 1-3/8"x24)
  • Made In: USA

What’s Included

  • YHM Long sRx Flash Hider (1/2-28)
  • Shim kit

Frequently Asked Questions

Do I need anything else to use the YHM sRx Flash Hider with my suppressor?

Yes, the quick-detach function requires the YHM sRx Adapter, part number YHM-4400, which is sold separately. The adapter threads onto any suppressor with the industry standard HUB 1-3/8×24 mounting pattern. Without the adapter, this piece still works fine as a standard flash hider on your muzzle.

Will the sRx Flash Hider work with suppressors from other brands?

It will, as long as the suppressor accepts HUB pattern mounts. The sRx Adapter attaches to the 1-3/8×24 HUB standard, which is used by a huge number of modern suppressors across many manufacturers. That makes this one of the more flexible QD setups out there.

What barrels does the 1/2-28 thread pattern fit?

The 1/2-28 thread pitch is the standard for most .223 Rem and 5.56 NATO barrels, including nearly every AR-15 on the market. If your rifle has a threaded 5.56 muzzle, chances are very good this will spin right on. YHM also makes a 5/8-24 version for larger calibers if that fits your build better.

What is the advantage of the sRx system over other QD mounts?

Simplicity and cleanliness. The large taper ahead of the threads seals against the suppressor so gas and carbon cannot bake onto the mounting threads, which keeps removal easy and mounting consistent. There are no springs, levers, or moving parts to wear out, and the system runs lighter than many competing QD options.

Additional information

UPC

841812101543

Manufacturer

Manufacturer Part Number

440528

Caliber/Gauge

.223 REM/5.56 NATO

Color

Black

Length

5.4500

Model

Package Height

1.4

Package Width

3.2

Product Type

Accessory-Muzzle Brakes

Shipping Weight

0.168

Thread Pattern

1/2"-28 tpi

Reviews

There are no reviews yet.

Be the first to review “YHM Long sRx Flash Hider 1/2-28 TPI Black Phosphate QD Muzzle Device”