Description
Quick-detach suppressor mounts have a habit of getting heavy and complicated. Yankee Hill Machine went the other direction with the sRx Mini. This 5/8×24 muzzle brake measures just 1.1 inches long and adds roughly half an inch to your barrel on a standard thread shoulder, so your rifle keeps its trim profile whether the can is on or off. There are no springs, no latches, no locking collars to fuss with. You get a simple, rugged piece of black phosphate steel that does its job every time.
How the sRx Mini Brake Mounts Your Can
The brake works with the YHM sRx Adapter (YHM-4400, sold separately), which threads into any suppressor with the industry standard 1-3/8×24 HUB interface. That includes YHM's own Fat Cat and Cat's Ass cans plus a long list of HUB suppressors from other makers. The trick is the large internal taper machined in front of the threads. When you spin the suppressor down, the taper wedges tight and seals the joint, so gas and carbon never reach the threads. That means consistent lockup shot after shot and no crusty threads to fight when it's time to take the can off.
Why the Mini Beats Bulkier QD Mounts
Because there are no moving parts, the sRx Mini runs lighter than most quick-detach systems out there, and there's nothing to wear out or rattle loose. It requires no shimming or timing to the barrel, which makes installation about as painless as it gets, and it can even be pinned and welded if your build calls for a permanent attachment. The 5/8×24 thread pattern makes this the natural pick for .308 and 7.62 NATO rifles, and like everything YHM builds, it's backed by their lifetime warranty. If you want your suppressed rifle to look clean and mount fast without extra ounces hanging off the muzzle, this little brake is a smart way to get there.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Model: sRx Mini QD Muzzle Brake
- Manufacturer Part Number: YHM-4401-MB-24
- UPC: 841812101512
- Thread Pattern: 5/8"-24 tpi
- Caliber: .308 / 7.62 NATO
- Overall Length: 1.10 in
- Length Added to Barrel: Approx. 0.475 in (on barrels with 0.6 in threads)
- Suppressor Compatibility: HUB 1-3/8×24 via sRx Adapter (YHM-4400)
- Material: Steel
- Finish: Black Phosphate
- Timing Required: No shims or timing needed
- Warranty: YHM Lifetime Manufacturer Warranty
What’s Included
- YHM sRx Mini QD Muzzle Brake, 5/8×24
Frequently Asked Questions
Does the sRx Mini Muzzle Brake work by itself, or do I need something else?
The brake works fine on its own as a standard muzzle brake, but to run a suppressor with it you need the YHM sRx Adapter (YHM-4400), which is sold separately. The adapter threads into your suppressor's 1-3/8×24 HUB mount, and the suppressor then spins onto the brake's tapered interface. Together they make up the complete sRx quick-detach system.
Will the YHM sRx Mini work with suppressors from other brands?
Yes, as long as the can uses the industry standard 1-3/8×24 HUB thread pattern, which most modern modular suppressors do. It was built alongside YHM's Fat Cat and Cat's Ass cans, but the HUB interface keeps it brand agnostic. Just confirm your suppressor is rated for the caliber you're shooting.
Do I need to time or shim this brake to my barrel?
No. The sRx system was designed so the brake doesn't need to be clocked to a specific position, which means no shim kits or crush washers to mess with. Thread it onto your 5/8×24 muzzle, torque it down, and you're set.
How does the taper seal keep carbon off the threads?
There's a large internal taper machined just ahead of the threads. When the suppressor tightens down, that taper creates a tight metal-on-metal seal that blocks gas and debris from reaching the threads during fire. The result is consistent lockup and a can that comes off easily even after long range sessions.






Reviews
There are no reviews yet.