Description
Yankee Hill Machine trimmed their proven QD flash hider down to a package that makes sense on shorter barrels and lightweight builds. The Mini QD measures just 2.125 inches long and weighs a mere 3.3 ounces, but it still does double duty as a legit flash hider and a fast-attach mount for YHM's quick-detach suppressors. On a barrel with standard 0.6 inch threads, it only adds about 1.5 inches of length, so your rifle stays handy instead of turning into a boat oar.
Why the Mini QD Flash Hider Earns Its Spot
A lot of QD mounts are pure suppressor hardware and shoot rough when the can comes off. This one does not have that problem. The prong design keeps flash signature down whether you are running suppressed or bare muzzle, so you are not swapping muzzle devices depending on the day. The steel body wears a manganese phosphate finish that shrugs off carbon and weather, and the machining is what you would expect from a company that has been cutting metal in Massachusetts since the early 1950s.
YHM Suppressor Compatibility
This 1/2-28 version mounts the Turbo T2, Turbo K, Resonator, Resonator R2, Resonator K, Nitro .30, all Phantom .30 caliber cans, plus the R9 9mm, Nitro N2O, and Wraith 9 XL. It also plays nice with YHM's 1.375-24 HUB Phantom QD adapter if you run a HUB-pattern suppressor. Keep in mind it will not fit the original Turbo, the Phantom 5.56 suppressors, the Wraith 45 XL, or the Phantom .338, so double check your can before ordering.
Getting the Mini QD Installed Right
Setup is straightforward. The included shim kit lets you time the prongs correctly without a crush washer, and YHM calls for 20 to 30 ft-lbs of torque on installation. Once it is snugged down and timed, mounting your suppressor takes seconds. Thread it on, lock it up, and get back to shooting.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Model: Mini QD (Mini Phantom Q.D.) Flash Hider
- Manufacturer Part Number: YHM-4315-28A
- UPC: 841812101079
- Thread Pattern: 1/2"-28 tpi
- Overall Length: 2.125 in
- Weight: 3.3 oz
- Added Length: Approx. 1.49 in on barrels with 0.6 in threads
- Material: Steel
- Finish: Black manganese phosphate
- Recommended Torque: 20-30 ft-lbs
- Suppressor Compatibility: Turbo T2, Turbo K, Resonator, Resonator R2, Resonator K, Nitro .30, Phantom .30 cal, R9 9mm, Nitro N2O, Wraith 9 XL
- Color: Black
What’s Included
- Mini QD Flash Hider
- Shim kit for timing/headspacing
Frequently Asked Questions
Which suppressors work with the YHM Mini QD Flash Hider?
It mounts YHM's Turbo T2, Turbo K, Resonator, Resonator R2, Resonator K, Nitro .30, all Phantom .30 caliber suppressors, plus the R9 9mm, Nitro N2O, and Wraith 9 XL. It also works with YHM's 1.375-24 HUB Phantom QD adapter. It will not fit the original Turbo, Phantom 5.56 cans, Wraith 45 XL, or Phantom .338.
Can I shoot with the Mini QD Flash Hider without a suppressor attached?
Yes, and it does a solid job in that role. YHM designed it to perform as a proper flash hider on its own, so you can run your rifle bare muzzle without swapping devices. It keeps flash signature down whether the can is on or off.
How do I install the Mini QD Flash Hider and what torque does it need?
It threads onto a 1/2-28 muzzle and comes with a shim kit so you can time the prongs correctly without a crush washer. YHM recommends torquing it between 20 and 30 ft-lbs. Once installed, your suppressor attaches and detaches in seconds.
How much length does this flash hider add to my barrel?
The device is 2.125 inches long overall, but since part of it threads over your barrel, it only adds about 1.49 inches on barrels with standard 0.6 inch thread length. At 3.3 ounces, it is one of the lighter QD mounts out there, which is why it is a favorite for compact builds.





Reviews
There are no reviews yet.