Description
The Magpul RLS (Rifleman Loop Sling) borrows the best ideas from two proven designs. It takes the simple carry-and-retain feel of the classic Rhodesian sling and blends it with the loop-up stability of an old-school 1907 match sling, then wraps it all in modern Magpul materials. The result is a two-point sling that keeps your rifle riding comfortably on the shoulder, then locks you into a steadier position the moment you need one. At just 4.4 oz, it barely registers on the gun but pulls real weight when you're behind it.
What Sets the RLS Sling Apart
The heart of this sling is Magpul's proprietary chafe-resistant 1.25-inch nylon mesh webbing. The tubular construction rounds off the hard edges that tend to rub or snag, and it stacks two layers of soft material against your shoulder so a long day in the field doesn't leave you sore. Even when you torque it down against your support arm, the surface stays smooth and comfortable rather than digging in. The colored webbing also gets an NIR treatment to keep its infrared signature low, which is a nice touch for anyone who cares about staying discreet.
Hardware and Setup on the Rifleman Loop Sling
Magpul went with lightweight reinforced injection-molded polymer hardware here, so you get the durability without the extra ounces or the metal-on-metal clatter. A proprietary sling keeper captures the excess webbing with no loose tails flapping around to catch on brush or gear. Adjustment is done by hand with no tools, and the sling plays nice with most standard 1.25-inch attachment hardware, so it fits a wide range of rifles and setups.
Field Ready and Built to Last
Magpul put the RLS through the same wringer as the rest of their sling line. It's been load tested, drop tested, and dragged through wet, dry, and sandy conditions, plus hiked, hunted, and shot with plenty. For a sling that carries, retains, and stabilizes all in one, it's a smart pickup for anyone building out an AR, a bolt gun, or a hunting rifle. Made in the USA.
Key Specifications
- Manufacturer: Magpul Industries
- Model: RLS (Rifleman Loop Sling)
- Manufacturer Part Number: MAG1004-BLK
- UPC: 840815121114
- Color: Black
- Style: Two-Point Sling
- Webbing Width: 1.25 in
- Webbing Material: Chafe-resistant tubular nylon mesh
- Hardware: Reinforced high-strength injection-molded polymer
- Weight: 4.4 oz
- Adjustment: Tool-free, hand adjustable
- Country of Origin: Made in USA
What’s Included
- Magpul RLS Two-Point Sling (Black)
- Integrated sling keeper
- Installation instructions
Frequently Asked Questions
What makes the Magpul RLS different from a standard carry sling?
The RLS pulls double duty. It works as a low-profile two-point carry and retention sling, but it also has an adjustable forward loop that grips your support arm to lock in a steadier shooting position. That loop feature comes straight from 1907 match-style slings and is what sets it apart from slings that only carry a rifle.
Will the RLS sling fit my rifle?
It's built around 1.25-inch webbing and is compatible with most standard sling attachment hardware. That means it works with conventional sling swivels or other common attachment points on AR-platform rifles, bolt guns, and hunting rifles. You'll want to make sure your rifle has front and rear attachment points that accept 1.25-inch hardware.
Is the RLS comfortable to wear for long days?
Yes, comfort was a big part of the design. The tubular nylon mesh webbing gives you double layers of cushioning against the shoulder, and the rounded construction avoids the sharp edges that tend to rub or dig in. Even when you cinch it down against your support arm for a shot, the surface stays smooth.
Does the RLS use metal or polymer hardware?
The RLS uses lightweight reinforced high-strength injection-molded polymer hardware. That keeps the whole sling down to just 4.4 oz and cuts out the metal-on-metal noise you get with some other slings. The polymer has been tested for durability in wet, dry, and sandy conditions.





Reviews
There are no reviews yet.