Description
Radian doesn't build parts that feel like an afterthought, and this Model 1 Upper and Hand Guard Set is a great example of that. The upper receiver and 14-inch hand guard are CNC machined as a matched pair, so the finish, fit, and lines carry cleanly from the receiver right down the rail. The whole thing wears a matching Olive Drab Green Cerakote, which is a nice change of pace if you're tired of everything on your rifle being flat black.
What Sets the Radian Model 1 Upper Apart
The receiver is cut from billet 7075-T6 aluminum and reinforced in the high-stress areas near the chamber, so you get a stiffer, more rigid platform than a lot of standard forged uppers. It comes assembled with a dust cover, a lightweight minimalist forward assist, and a hand guard anti-rotation pin. Every edge has been chamfered, so there are no sharp corners digging into your hands when you're running the gun. This is a stripped upper setup, meaning you supply your own barrel and bolt carrier group to finish the build.
Getting the Most From the 14" M-LOK Hand Guard
The free-float hand guard uses genuine Magpul M-LOK slots at the 3, 6, and 9 o'clock positions along with a continuous Picatinny top rail, so mounting optics, lights, lasers, and bipods stays simple and repeatable. At 14 inches it hits a sweet spot for carbine and rifle builds, giving you plenty of real estate for a hand stop, light, or sling mount without turning the front end into a boat anchor. It locks to the barrel nut with four steel cross bolts coated in black nitride for corrosion resistance, which keeps the rail rock solid and holding zero on anything you bolt to it.
The included Raptor-SD ambidextrous charging handle is the standout here. Its ported shaft redirects gas down and forward when you're running a suppressor, keeping blowback out of your face, and the dual extended latches let you charge the rifle fast from either side. For a suppressed or ambi-focused build, that's a meaningful head start already sitting in the box.
Key Specifications
- Manufacturer: Radian Weapons
- Manufacturer Part Number: R0628
- UPC: 817093026080
- Model: Model 1 Upper / Hand Guard Set
- Platform: AR-15
- Hand Guard Length: 14 inches
- Mounting Interface: Magpul M-LOK at 3, 6, and 9 o'clock with continuous Picatinny top rail
- Receiver Material: Billet 7075-T6 Aluminum
- Finish: Cerakote Olive Drab Green
- Charging Handle: Raptor-SD Ambidextrous (suppressor-optimized)
- Cross Bolts: Four steel cross bolts, black nitride coated
- Hand Guard Height: 2.1 inches
- Hand Guard Width: 1.81 inches
- Hand Guard Weight (with barrel nut): 1.6 lbs
- Color: Olive Drab Green
What’s Included
- 1 x Billet Upper Receiver with dust cover, lightweight forward assist, and hand guard anti-rotation pin
- 1 x Raptor-SD Ambidextrous Charging Handle
- 1 x 14" Hand Guard with Magpul M-LOK interface
- 1 x 7075-T6 Aluminum Barrel Nut
- 1 x Barrel Nut Wrench
- Mounting hardware (steel cross bolts)
Frequently Asked Questions
Does the Radian upper and hand guard set come with a barrel or bolt carrier group?
No, this is a stripped set built around the upper receiver and hand guard, so it does not include a barrel or BCG. You'll supply those yourself along with a gas system to complete the build. What you do get is the assembled upper, the 14-inch hand guard, the Raptor-SD charging handle, the barrel nut, and the mounting hardware.
What barrel lengths work well with the 14" hand guard?
A 14-inch free-float rail pairs nicely with carbine and rifle builds, and it's a common match for mid-length gas setups in the 16-inch barrel range. The rail gives you room to run a suppressor and still have plenty of M-LOK real estate up front. Just make sure your gas block and any muzzle device or can clear the end of the hand guard.
Why does the Raptor-SD charging handle matter on this set?
The Raptor-SD is Radian's suppressor-optimized charging handle with a ported shaft that redirects gas down and forward, away from your face when shooting suppressed. It's also fully ambidextrous with dual extended latches, so you can charge the rifle fast from either hand. For a suppressed or ambi-focused build, having it included is a real value add.
Is the M-LOK on this Radian hand guard the real Magpul standard?
Yes, the hand guard uses genuine Magpul M-LOK slots, so any M-LOK compatible accessory will bolt right up. You'll find slots at the 3, 6, and 9 o'clock positions plus a continuous Picatinny top rail for optics and sights. That gives you flexibility to mount lights, lasers, grips, bipods, and sling hardware wherever you need them.





Reviews
There are no reviews yet.