Description
The Radian Talon 45/90 is one of those upgrades that makes your milspec safety feel clunky the second you run it. It's an ambidextrous selector built for AR-pattern rifles, and the party trick is the modular shaft. Install it one way for a standard 90-degree throw, or rotate it 180 degrees inside the lower for a 45-degree short throw. That means faster, more natural on-and-off manipulation without hunting for a different part. The kit comes with both a short and a long lever, so left or right handed, you can dial in the setup that keeps the levers clear of your trigger finger.
What Sets the Talon 45/90 Apart
Most ambi safeties still rely on tiny screws to hold the levers on, and those have a habit of backing out at the worst time. Radian ditched them entirely. The levers lock onto a precision-machined dovetail with a spring-loaded retention stud, so there's nothing to loosen, strip, or fall off during a range session. It's a cleaner, tougher way to attach a lever, and long-term users consistently report the clicks stay crisp and positive even after years of hard use.
Built From Real Materials
This isn't a cast bargain part. The center shaft is machined from hardened steel with a black nitride finish that keeps operation smooth and shrugs off wear, while the levers are cut from billet 7075-T6 aluminum. Everything is designed and made in the USA. The finish here is Radian Gray, which pairs nicely with a wide range of builds without shouting for attention.
Fit and Setup on the Talon 45/90
The Talon works with most semi-automatic AR-15 and AR-10/SR25-pattern rifles, plus SIG MCX and MPX platforms. Radian includes its own detent and spring in the kit and recommends using them during install. A common tip from folks running it: put the shorter lever on your trigger-finger side so it stays out of the way when the safety is off. Beyond a screwdriver or Allen wrench to pull your grip, you've got what you need in the box.
Key Specifications
- Manufacturer: Radian Weapons
- Model: Talon 45/90
- Manufacturer Part Number: R0567
- UPC: 817093025502
- Color: Radian Gray
- Hand Orientation: Ambidextrous
- Throw Options: 45-degree short throw or 90-degree standard
- Lever Material: Billet 7075-T6 aluminum
- Shaft Material: Hardened steel, black nitride finish
- Lever Retention: Dovetail interface with spring-loaded stud, no screws
- Compatibility: AR-15, AR-10/SR25, SIG MCX and MPX
- Levers Included: Short and long (2-lever combo)
- Length: 7.15 in
- Origin: Made in the USA
- Product Type: Safety Selector
What’s Included
- Two selector levers (one short, one long)
- One selector shaft
- One selector detent
- One selector detent spring
- Two retention studs with springs
- Instructions
Frequently Asked Questions
How do I switch the Talon 45/90 between a 45 and 90 degree throw?
You choose the throw during installation by how you orient the center shaft. Rotating the shaft 180 degrees inside the lower receiver lines up a different detent cutout, which sets it to either the 90-degree standard throw or the 45-degree short throw. It's an easy change if you want to experiment and see which feels faster for you.
Will the Radian Talon fit my rifle?
The Talon is compatible with most semi-automatic AR-15 and AR-10/SR25-pattern rifles, as well as SIG MCX and MPX platforms. It's designed for milspec lower receivers, so if you're running a standard AR build you should be good to go. If you have a proprietary or non-milspec lower, it's worth double-checking dimensions before installing.
Do the Talon levers really hold on without screws?
Yes, and that's a big part of the appeal. Each lever locks onto a machined dovetail and is held by a spring-loaded retention stud instead of a set screw. That eliminates the loose or stripped screws that plague a lot of other ambi selectors, and users running the Talon for years report the levers stay locked in with positive, repeatable clicks.
Which side should the long and short levers go on?
It comes down to your dominant hand and how you grip the rifle. A common setup is putting the shorter lever on your trigger-finger side so it stays clear of your finger when the safety is off, and the longer lever on the opposite side for easy reach. Since both levers come in the kit, you can try it a couple of ways without buying anything extra.




Reviews
There are no reviews yet.