0
0

Yankee Hill Phantom QD Flash Hider 30 Cal 5/8×24 – YHM-4302-24A

UPC: 816701017021

$99.75

Out of stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Phantom QD Flash Hider pulls double duty, and it does both jobs well. On its own, it's one of the most respected flash hiders in the business, using YHM's time-tested 5-port design with no downward-facing port, so you're not kicking up dust when shooting prone. Threaded 5/8×24 for .308 and 7.62 NATO barrels, it's the natural fit for AR-10s, bolt guns, and just about any .30 cal rifle wearing that thread pitch. Torque it to 20 to 30 ft-lbs and skip the crush washer entirely, since the design doesn't need one and YHM specifically says not to use one. No shimming, no indexing headaches.

Your Mount for YHM Quick-Disconnect Suppressors

The real reason most folks pick this up is the suppressor mounting side of things. This is the QD mount for YHM's .30 cal Phantom LT and LTA suppressors, and with the Phantom QD Adapter it also works with YHM's HUB-capable cans like the Turbo T3, Turbo K-RB, Resonator R2 and RK, Fat Cat, R9, and R45. Grab a few of these for different rifles and one can covers your whole safe. Just know it will not fit the 5.56 Phantom or Phantom M2 suppressors, so double-check your can before ordering.

Built to Take Abuse

YHM machined some smart details into this mount. Carbon scraper teeth clean fouling off your suppressor's internal support system every time you mount up, which matters a lot on a QD system that sees regular on-and-off use. A dual support system keeps the can aligned with your bore, the external locking mechanism keeps heat away from the spring, and that spring is a high-temperature design built for long service life. A dust enclosure seals off the internal moving parts from grit and grime. The whole thing is steel with a black finish, adds right around 2 inches to your barrel, and weighs a shade over 4 ounces.

If you're running or planning to run a YHM .30 cal can, this is the mount that makes swapping between rifles quick and painless.

Key Specifications

  • Manufacturer: Yankee Hill Machine
  • Manufacturer Part Number: YHM-4302-24A
  • UPC: 816701017021
  • Model: Phantom Q.D.
  • Caliber: .308 / 7.62 NATO (.30 Cal)
  • Thread Pattern: 5/8"-24 tpi
  • Material: Steel
  • Finish: Black
  • Port Design: 5-port, no downward-facing port
  • Device Length: 2.6 in
  • Length Added to Barrel: Approx. 2 in (on 0.6 in threads)
  • Weight: 4.1 oz
  • Suppressor Compatibility: YHM .30 Cal Phantom LT/LTA; HUB suppressors via Phantom Q.D. Adapter
  • Recommended Torque: 20-30 ft-lbs (no crush or peel washers)

What’s Included

  • Phantom Q.D. Flash Hider

Frequently Asked Questions

Which suppressors work with the Phantom QD Flash Hider?

It's built for YHM's .30 caliber Phantom LT and LTA quick-disconnect suppressors. It also works with YHM's 1-3/8"-24 HUB-capable cans like the Turbo T3, Turbo K-RB, Resonator R2 and RK, Fat Cat, R9, and R45 when paired with the Phantom Q.D. Adapter. It will not fit the 5.56 Phantom or Phantom M2 suppressors.

Do I need a crush washer to install the YHM-4302-24A?

No, and YHM specifically says never to use crush or peel washers with this device. Just thread it on and torque it between 20 and 30 ft-lbs. There's no timing or indexing required since the ports don't need to be clocked to a specific position.

Does it work as a flash hider without a suppressor attached?

Yes, that's half the point of this design. It uses the same proven 5-port Phantom geometry YHM has been machining for decades, which does an excellent job cutting visible flash. With no downward-facing port, it also won't blast dust up at you when shooting prone.

What do the carbon scraper teeth on this Phantom QD mount do?

Every time you mount your suppressor, the scraper teeth clean carbon buildup off the can's internal support system. Carbon fouling is the main enemy of any quick-disconnect setup, so this keeps the mount locking up tight and the suppressor coming off easily after long range sessions.

Additional information

UPC

816701017021

Manufacturer

Manufacturer Part Number

YHM-4302-24A

Caliber/Gauge

.308 / 7.62 NATO

Color

Black

Length

6.7000

Model

Package Height

1.3

Package Width

3.2

Product Type

Flash Hider

Shipping Weight

0.278

Thread Pattern

5/8"-24 tpi

Reviews

There are no reviews yet.

Be the first to review “Yankee Hill Phantom QD Flash Hider 30 Cal 5/8×24 – YHM-4302-24A”