Description
Bare muzzle threads have a way of finding trouble. A ding from a range bag zipper, a little surface rust from a humid safe, and suddenly your muzzle device or suppressor mount does not want to spin on straight. The Yankee Hill Machine YHM-3414-B is the simple fix. It threads onto any 5/8×24 muzzle, which covers most .308 and .30 caliber rifle barrels along with plenty of 6.5 Creedmoor builds, and shields those threads until you are ready to mount something.
Why the .920 OD Matters on This YHM Thread Protector
What sets this one apart from the run of the mill protectors is the .920 inch outside diameter. That measurement is no accident. It matches the classic bull barrel profile, so on a heavy .920 barrel this protector sits flush with the barrel contour instead of leaving an awkward step at the muzzle. The rifle looks finished and clean, like the barrel was never threaded at all. If you have a precision bolt gun or a varmint rig with a heavy barrel, this is the protector that will not stick out like a sore thumb.
Built the Yankee Hill Machine Way
YHM has been machining barrels, suppressors, and muzzle hardware in Massachusetts for decades, and their small parts get the same treatment as the big ticket items. This protector is cut from steel, not aluminum, so cross threading and battered corners are far less of a concern, and the plated matte black finish keeps glare down and corrosion at bay. At roughly an ounce, you will never notice it is there.
Simple Insurance for Your 5/8×24 Muzzle Threads
Installation could not be easier. Spin it on hand tight and go. Whether your suppressor lives on another rifle, you are waiting on paperwork, or you just prefer shooting without a brake, this little piece of steel is cheap insurance for threads that are expensive to repair. Toss a spare in the range bag and you will thank yourself later.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-3414-B
- UPC: 816701013955
- Product Type: Rifle Thread Protector
- Thread Pitch: 5/8×24 TPI (.625×24)
- Outside Diameter: .920 in (bull barrel profile)
- Caliber Compatibility: .30 Caliber / .308
- Material: Steel
- Finish: Plated Matte Black
- Color: Black
- Weight: Approx. 1 oz
What’s Included
- One YHM-3414-B 5/8×24 thread protector
Frequently Asked Questions
Will the YHM-3414-B fit my 6.5 Creedmoor barrel?
Yes, as long as your muzzle is threaded 5/8×24, which is the standard pitch for most 6.5 Creedmoor and .308 rifle barrels. The protector only cares about the thread pitch, not the bore diameter. Just keep in mind the .920 outside diameter is sized to match heavy bull barrel profiles.
What does the .920 OD mean and why does it matter?
The .920 refers to the outside diameter of the protector, which matches the common .920 inch bull barrel contour. On a heavy profile barrel it sits flush with the muzzle for a clean, seamless look. It will still thread onto a thinner barrel, it will just be wider than the barrel itself.
Do I need a crush washer or thread locker to install this thread protector?
No, hand tight is all it takes. Since a thread protector does not need to be timed or torqued like a brake or flash hider, you can spin it on and off by hand in seconds. A light coat of oil or anti-seize on the threads is a good habit if it will stay on for long stretches.
Is the YHM thread protector steel or aluminum?
This one is machined from steel with a plated matte black finish. Steel holds up better than aluminum against dings, cross threading, and general abuse, which is exactly what you want from a part whose whole job is taking hits so your barrel threads do not.






Reviews
There are no reviews yet.