0
0

Yankee Hill Machine 1/2×28 Thread Protector, .22/5.56, Steel, Black

UPC: 816701013917

$16.99

61 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A threaded barrel with nothing on it is just asking for trouble. One bump against a safe door or a range bench and you're looking at buggered threads that won't take a suppressor mount or muzzle brake cleanly. Yankee Hill Machine's answer is simple: a steel thread protector cap that spins onto any 1/2×28 muzzle and takes the abuse so your barrel doesn't have to. This one covers the .22, .223, and 5.56 family, which makes it right at home on AR-15s, threaded 10/22s, and just about any rimfire or 5.56 barrel cut with the standard 1/2×28 pitch.

Why the YHM Thread Protector Earns a Spot in Your Range Bag

YHM machines these from steel rather than aluminum, so it holds up to repeated install and removal cycles without the threads wearing loose. The knurled outer surface gives your fingers real purchase, meaning you can snug it down or pull it off by hand at the range without digging out a wrench. The matte black finish keeps it low key on a black rifle and blends in like it came on the barrel from the factory. It also keeps carbon, dirt, and cleaning solvents out of the thread channels between range trips, which matters more than most folks realize if a suppressor is in your future.

Fit and Function of the Yankee Hill 1/2×28 Protector

Installation could not be simpler. Clear the rifle, spin the protector on hand tight, and you're done. No crush washer, no shims, no timing to worry about. If you run a can and pull it off between stages or before the rifle goes back in the safe, keeping one of these threaded on is cheap insurance for the mount surface your suppressor depends on. Plenty of people buy two or three and keep a spare in the range bag, because small black parts have a way of wandering off. It's the kind of unglamorous piece of gear you forget about until the day you need it, and then you're glad it's there.

Key Specifications

  • Manufacturer: Yankee Hill Machine
  • Manufacturer Part Number: YHM-3412-B
  • UPC: 816701013917
  • Product Type: Thread Protector
  • Thread Pitch: 1/2×28
  • Caliber Compatibility: .22 / .223 / 5.56
  • Material: Steel
  • Finish: Matte Black
  • Texture: Knurled exterior for hand installation

What’s Included

  • Yankee Hill Machine 1/2×28 thread protector

Frequently Asked Questions

Will the YHM-3412-B thread protector fit my rifle?

If your barrel is threaded 1/2×28 and chambered in .22 LR, .223, or 5.56, you're good to go. That covers most AR-15s and the majority of threaded rimfire barrels like the Ruger 10/22 takedown and aftermarket rimfire barrels. Just confirm your thread pitch is 1/2×28, since some rimfires use 1/2×20 instead.

Can I use this thread protector on a 9mm barrel with 1/2×28 threads?

No, this one is sized for the .22 caliber bore family. Even though some 9mm barrels share the 1/2×28 thread pitch, YHM makes separate protectors for larger bores, so grab the correct 9mm version if that's what you're running.

Do I need a crush washer or thread locker to install it?

Nope, hand tight is all it takes. The knurled body gives you plenty of grip to snug it down, and since it's not a muzzle device that needs timing, there's no washer or shim kit involved. Check it now and then during long range sessions, as any thread-on part can loosen with vibration.

Why bother with a thread protector at all?

Exposed muzzle threads are easy to ding, and damaged threads can keep a suppressor or muzzle brake from seating squarely, which is an expensive problem to fix. A steel cap like this shields the threads from impacts and keeps carbon and grime out of them. It's one of the cheapest ways to protect a threaded barrel you've already invested in.

Additional information

UPC

816701013917

Manufacturer

Manufacturer Part Number

YHM-3412-B

Color

Black

Model

Product Type

Thread Protector

Reviews

There are no reviews yet.

Be the first to review “Yankee Hill Machine 1/2×28 Thread Protector, .22/5.56, Steel, Black”