Description
Yankee Hill Machine took their well-known Phantom platform and reworked it to serve as a dedicated muzzle brake and compensator. The Phantom 5M2 uses a five-port layout with no downward-facing ports, which does two useful things at once: it helps tame recoil and muzzle rise for faster, flatter follow-up shots, and it keeps gas and debris from kicking up a dust cloud when you're shooting from prone. It's threaded 1/2×28 for 5.56mm AR-pattern barrels and runs right around three ounces, so it won't throw off the balance of your rig.
What the Phantom 5M2's Smooth End Brings to the Table
The defining feature of this model is the smooth "No Snag" front profile. Unlike the aggressive-toothed 5M1, the 5M2 skips the pronged end so it won't catch on gear, bags, or clothing when you're moving around or pulling it out of a case. That sleeker shape also makes wiping it down after a range day a lot less fiddly. It's a good pick if you want brake performance without a jagged front end getting in the way.
Built From Steel and Ready to Bolt On
This is a steel muzzle device with a matte black finish, machined to the standard YHM quality folks have come to expect from the brand. A crush washer comes in the box, so once you've got a wrench and a little know-how, install is about as straightforward as it gets. Shooters routinely mention getting theirs timed and torqued down in just a few minutes.
Worth knowing up front: the Phantom 5M2 is a brake and compensator, not a flash hider, so it won't cut down muzzle flash. What it will do is keep the gun flat and controllable, which is exactly what you want for rapid strings or competition-style shooting. Just plan on it being on the louder side, since that's the trade-off with any effective brake that vents gas out to the sides.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Model: Phantom (5M2)
- Manufacturer Part Number: YHM-28-5M2
- UPC: 816701013665
- Product Type: Muzzle Brake / Compensator
- Caliber: 5.56mm / .223
- Thread Pattern: 1/2"x28
- Port Design: 5-port, no downward-facing ports
- Front Profile: Smooth No Snag
- Material: Steel
- Finish: Matte Black
- Color: Black
- Length: Approx. 2.25 in
- Weight: Approx. 3 oz
- Made In: USA
What’s Included
- YHM Phantom 5M2 muzzle brake
- Crush washer
Frequently Asked Questions
Does the Phantom 5M2 reduce muzzle flash?
No, this is a muzzle brake and compensator, not a flash hider. Its job is to cut down recoil and muzzle rise for flatter, faster follow-up shots. If reducing visible flash is your priority, you'll want to look at a dedicated flash hider instead.
What thread pitch and caliber does the YHM Phantom 5M2 use?
It's threaded 1/2×28, which is the standard pitch for 5.56mm and .223 AR-pattern barrels. Make sure your barrel matches that thread pattern before ordering. It will not fit barrels with a different thread pitch.
Is a crush washer included, and how hard is it to install?
Yes, a crush washer comes in the box, so you have what you need to get it timed and mounted. With a proper wrench and a vise, most people have it torqued down and clocked correctly in just a few minutes. It's a beginner-friendly job as far as muzzle devices go.
How does the smooth 5M2 differ from the aggressive 5M1 Phantom?
Both share the same five-port brake design, but the 5M2 has a smooth "No Snag" front end while the 5M1 keeps the aggressive toothed profile. The smooth version won't catch on gear or clothing and is easier to clean. Performance at the muzzle is very similar between the two.






Reviews
There are no reviews yet.