Description
Yankee Hill Machine has built a reputation for parts that just plain hold up, and the Diamond Series mid-length forearm is a great example of that workman-like quality. This one measures 9.29 inches, which lines up perfectly with mid-gas 16-inch barrel builds, and it swaps out your factory drop-in handguards for a true free-float setup. That means your support hand, sling, or bipod pressure never touches the barrel, so your groups stay honest downrange.
The forearm and barrel nut are machined from 6061-T6 aluminum and finished with a hardcoat matte anodize that meets or beats military spec, while the jam nut and anti-rotation screws are steel plated in matching matte black. It tips the scale right around 15.2 ounces with a 1.75-inch inner diameter, giving you plenty of room to clear a low-profile gas block. Pair it with YHM's own low-profile gas block and this length will tuck a carbine-length gas system completely out of sight for a cleaner look and a longer sight radius.
What the Diamond Series Mid-Length Brings to Your Build
The namesake diamond-shaped cutouts aren't just for looks, though they do echo the YHM logo nicely. They vent heat off the barrel faster during strings of fire while shaving a little weight. Up top you get a full-length Picatinny rail with an extended section that butts right up against the upper for a gap-free, monolithic feel, and the T-markings let you note exactly where your optic or backup irons sit so you can pull them and put them back in the same spot every time. Rails at 3, 6, and 9 o'clock round out the accessory real estate.
Installing the YHM Diamond Series Forearm
Everything you need to bolt it on comes in the box. Installation is straightforward for anyone comfortable with a build: remove the delta ring and factory barrel nut, thread on the YHM nut, and lock the forearm down with the two anti-rotation screws. You'll want an upper vise block and an armorer's or barrel nut wrench, and YHM's own YHM-9621 forearm wrench makes tightening the jam nut and barrel nut clean and scratch-free. Note this fits mil-spec AR-15 uppers but not delta ring or handguard-cap systems.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Model: 9.290" Diamond Series Forearm (Mid-Length)
- Manufacturer Part Number: YHM-9633-DX
- UPC: 816701012590
- Platform: AR-15 (mil-spec upper)
- Gas System Fit: Mid-Length
- Overall Length: 9.29 inches
- Weight: 15.2 oz
- Inner Diameter: 1.75 inches
- Material: 6061-T6 Aluminum
- Finish: Hardcoat Matte Anodized, Mil-Spec or better
- Mounting Style: Free Float
- Rail Type: Picatinny at 12, 3, 6, and 9 o'clock
- Top Rail: Extended, T-marked, gap-free
- Color: Black
What’s Included
- Diamond Series mid-length forearm tube
- Barrel nut
- Jam nut
- Two anti-rotation screws
- Installation instructions
Frequently Asked Questions
What barrel length and gas system does the YHM Diamond Series mid-length forearm fit?
This is the mid-length version at 9.29 inches, so it's built to pair with a mid-gas system, which you'll most often find on 16-inch barrels. Match the handguard to your gas system rather than just the barrel length, since the gas block position determines where the tube ends. It fits mil-spec AR-15 uppers but not delta ring or handguard-cap setups.
Do I need special tools to install the Diamond Series handguard?
You'll want an upper receiver vise block and an armorer's or barrel nut wrench to remove the factory nut and torque the new one. YHM's barrel nut works with standard armorer's wrenches, though their YHM-9621 forearm wrench is purpose-made for the barrel nut and jam nut and helps avoid scratching the finish. Getting the barrel nut properly torqued and timed matters, since a loose nut can rotate and throw off anything mounted to the top rail.
Does everything I need to mount it come in the box?
Yes. The forearm ships with the barrel nut, jam nut, two anti-rotation screws, and installation instructions. You'll just need to supply your own tools and, if you're running a covered gas system, a low-profile gas block.
What's the point of the diamond-shaped cutouts and the T-marked rail?
The diamond vents help dissipate heat off the barrel during extended shooting while trimming a bit of weight, and they're the signature look that gives the series its name. The T-marks on the extended top rail let you record exactly where your optic or backup sights sit, so you can remove and reinstall accessories and return to the same zero position.






Reviews
There are no reviews yet.