Description
Getting a rifle dialed in is a whole lot easier when your target does some of the math for you. The Action Target Advanced Rifle Sighting Target uses a diamond grid built so that at 100 yards, every square equals a true minute of angle instead of a rounded-off inch. That difference sounds small, but over the length of a target it adds up, and it means your turret adjustments translate cleanly to where the bullet hits the paper.
Why the True-MOA Grid on These Rifle Sighting Targets Matters
Most budget targets print a plain 1-inch grid, which is close but not exact. One MOA is really 1.047 inches at 100 yards, and these targets are laid out to that number. When you shoot a group, count the squares from your point of impact back to center, and dial that many MOA on your scope, the correction actually matches up. With a common quarter-MOA scope, four clicks equals one square, so figuring out your adjustment becomes simple counting instead of guesswork.
Built for the Range at 14 x 15 Inches
Each sheet measures 14 by 15 inches with a high-contrast black and red diamond pattern that's easy to pick up through a scope or spotting glass. That gives you plenty of room to catch a spread-out group and still read your grid. They hang easily on a standard target stand or backer, and the paper holds up fine for the kind of repeated use you get during a sight-in session.
Action Target is a name you'll see at commercial ranges, in law enforcement training, and on competition circuits, so these are the same targets serious shooters rely on. The 100-count box is the practical part. Zeroing a new optic, load testing, or checking your dope all burns through paper, and having a stack on hand means you're not rationing targets when you'd rather be shooting. Whether you're setting up a fresh scope or confirming a known zero, this pack keeps you going for a long while.
Key Specifications
- Manufacturer: Action Target
- Model: Advanced Rifle Sighting
- Manufacturer Part Number: SI13100
- UPC: 816506026815
- Product Type: Paper Target
- Target Design: Diamond Grid
- Grid Calibration: True 1.047" MOA at 100 Yards
- Dimensions: 14" x 15"
- Colors: Black / Red / White
- Mount Type: Hanging
- Intended Distance: 100 Yards
- Quantity: 100 Per Box
What’s Included
- 100 Action Target Advanced Rifle Sighting diamond paper targets
Frequently Asked Questions
What makes the grid on these rifle sighting targets different from a standard target?
One MOA is really 1.047 inches at 100 yards, not a flat inch, and these targets are printed to that exact measurement. That means when you count squares from your group to center and dial that many MOA on your scope, the correction matches what you see on paper. Generic 1-inch grids get you close but introduce a little error that these avoid.
How do I use the Action Target rifle sighting target to zero my scope?
Set the target at 100 yards, aim at the center, and fire a three to five shot group off a solid rest. Count the diamond squares from the center of your group back to the aiming point in both directions, then dial that many MOA of correction on your turrets. With a quarter-MOA scope, each square works out to four clicks, so the adjustment is easy to figure.
Can I use these targets at distances other than 100 yards?
You can, but the true-MOA grid is calibrated specifically for 100 yards, so that's where the math lines up perfectly. At 50 yards the squares still work if you halve your calculations, and plenty of folks use the center diamond as a clean aiming point for close-range sight-in before moving back. For the most straightforward turret math, 100 yards is the sweet spot.
Why does the box come with 100 targets?
Zeroing an optic, load testing, and confirming your dope all go through paper quickly, so a 100-count box keeps you supplied for a long stretch of range trips. It works well for individual shooters who want a stash on hand, and it's a natural fit for ranges and training groups. You won't find yourself rationing targets mid-session.




Reviews
There are no reviews yet.