Description
When your bolts, pistons, and suppressor baffles are caked with carbon that a regular patch just smears around, this is the stuff that finally cuts through it. Slip 2000 Carbon Killer is a water-based, non-flammable soak cleaner built to break the bond between fouling and metal. You submerge the part, walk away for a few minutes, and come back to carbon, lead, and plastic wad buildup that wipes right off. No harsh solvent fumes, no flash-off, and it's biodegradable with a light orange scent that beats the usual chemical stink.
What Makes Carbon Killer Different
This isn't an everyday wipe-down cleaner. Slip 2000 designed Carbon Killer as a dedicated soak for neglected or heavily fouled parts that would otherwise take a lot of scrubbing. It's the step up from their 725 Gun Cleaner, meant for high round counts, dirty gas systems, and the components you've been putting off cleaning for way too long. The formula keeps working even as it gets dirty, so one jar can be reused across many cleanings if you seal it up and store it properly.
Getting the Most Out of Your Carbon Killer
Usage is about as simple as it gets. Fully submerge the part and let it soak for roughly 5 to 15 minutes, then wipe or rinse off the loosened fouling. Really stubborn buildup might call for a second soak. For bores and larger pieces that won't fit in the jar, run a saturated patch or mop through, or plug one end and fill it up, then let it sit and brush it out. It works on just about any metal part: revolver cylinders, forcing cones, compensators, bolts and carriers, firing pins, flash suppressors, and cans.
One thing worth knowing up front: Carbon Killer is aggressive, so keep it to internal metal parts and bores. It's not meant for the outside of your gun since it can affect some finishes. After cleaning, hit your parts with a Slip 2000 lubricant to displace moisture, prevent corrosion, and slow down the next round of carbon buildup.
Key Specifications
- Brand: Slip 2000
- Model: Carbon Killer
- Manufacturer Part Number: 60108-12
- UPC: 815706001080
- Size: 15 oz
- Product Type: Liquid soak cleaner
- Formula: Water-based, non-flammable, non-hazardous, biodegradable
- Scent: Orange / citrus
- Reusable: Yes, with proper airtight storage
- Intended Use: Internal metal parts and bores
- Country of Manufacture: United States
What’s Included
- One 15oz jar of Slip 2000 Carbon Killer bore and parts cleaner
Frequently Asked Questions
How long should I soak parts in Slip 2000 Carbon Killer?
For most parts, submerge them completely and let them soak for about 5 to 15 minutes, then wipe or rinse off the loosened carbon. If you're dealing with really baked-on buildup or heavy round counts, a second soak may be needed. Larger, more neglected pieces can sit toward the longer end of that range.
Can I use Carbon Killer on the outside of my gun?
No, this one is strictly for internal metal parts and bores. Carbon Killer is an aggressive cleaner and can damage or remove some external finishes and coatings. Stick to bolts, carriers, pistons, suppressor components, and bores, then re-lube afterward.
Is Slip 2000 Carbon Killer really reusable?
Yes, and that's one of its best features. The formula keeps working even as it gets dirty, so a single jar can handle many cleanings over time. Just seal it in an airtight container between uses so it doesn't lose its punch.
Does Carbon Killer work as a bore cleaner too?
It does. You can run a saturated patch or mop through the bore, or plug one end and fill it with Carbon Killer to let it soak. Give it a few minutes, brush it out, then follow up with a Slip 2000 lubricant to protect the metal.





Reviews
There are no reviews yet.