Description
Anyone who has tried building or tearing down a firearm with a hardware-store punch set knows the pain: bent tips, marred finishes, and pins that walk sideways the second you tap them. The Real Avid Accu-Punch Hammer & Roll Pin Punch Set was built from the ground up to work on guns, not repurposed from generic bench tools, and that difference shows the first time you seat a trigger guard pin or knock out a gas block roll pin.
The centerpiece is a balanced gunsmithing hammer with a rubberized, ergonomic grip and four interchangeable heads: steel, brass, nylon, and rubber. That range lets you dial in the right amount of force, from a gentle tap on a stubborn detent pin to a firmer strike when something needs a little persuasion. Swapping heads means you are not reaching for a second hammer halfway through a build.
What Sets the Accu-Punch Roll Pin Set Apart
The punches are hardened steel with a nickel plating to fight corrosion, and each one wears a hex-shaped handle with a rubber O-ring so it stays put in your fingers and won't roll off the bench. You get a full spread of roll pin punches in 1/16", 5/64", 3/32", 1/8", 9/64", 5/32", 3/16", 7/32", and 1/4" sizes, plus a 5/16" engineering resin punch and a non-marring finishing punch for the jobs where protecting the finish matters most.
Getting Pins Started Without the Headache
The standout piece for a lot of builders is the proprietary Pin Alignment Tool. It holds even the smallest pins precisely so you can line things up and get them started square, which is exactly where most roll pin jobs go wrong. It's the kind of thing you don't realize you needed until you've used it once.
Everything lives in a rugged stand-up case that keeps the punches organized and visible, so it's ready to grab for a garage build or toss on the bench during routine maintenance. For AR-15 work in particular, this set covers the standard pin sizes you'll run into and holds up far better than the cheap alternatives.
Key Specifications
- Manufacturer: Real Avid
- Model: Accu-Punch
- Manufacturer Part Number: AVHPS-RP
- UPC: 813119012686
- Product Type: Gunsmithing Hammer & Punch Set
- Hammer Heads: Steel, Brass, Nylon, Rubber (interchangeable)
- Punch Material: Nickel-plated hardened steel
- Handle Style: Hex-shaped with rubber O-rings
- Roll Pin Punch Sizes: 1/16", 5/64", 3/32", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"
- Resin Punch: 5/16" engineering resin
- Piece Count: 18
- Overall Length: 9.15 in
- Style: Roll Pin
- Case: Stand-up storage case
What’s Included
- Accu-Punch gunsmithing hammer with rubberized grip
- 4 interchangeable hammer heads (steel, brass, nylon, rubber)
- Roll pin punches: 1/16", 5/64", 3/32", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"
- 5/16" engineering resin punch
- Non-marring finishing punch
- Proprietary Pin Alignment Tool
- Stand-up storage case
Frequently Asked Questions
Is the Accu-Punch Roll Pin Set good for building an AR-15?
Yes, this is one of the more popular picks for AR builds. It covers the standard roll pin sizes you'll run into on a receiver set, and the pin alignment tool makes starting those fussy trigger guard and pivot pins much easier. Builders who upgraded from cheap generic punches consistently note the difference in quality and durability.
What hammer heads come with the Accu-Punch hammer?
The hammer includes four interchangeable heads: steel, brass, nylon, and rubber. That lets you match the strike to the job, from a soft tap on a delicate detent to a firmer knock on a stubborn pin. Swapping heads is quick, so you won't need a separate mallet on the bench.
Does this set include the pin alignment tool?
It does. The proprietary Pin Alignment Tool holds even the smallest pins precisely so you can line them up and get them started square. It's the piece most builders point to as the reason roll pin work goes smoother with this kit.
Will the punches mar or scratch my firearm's finish?
The set includes a non-marring finishing punch specifically for jobs where protecting the finish matters, and the nickel plating on the steel punches helps resist corrosion. The rubber and nylon hammer heads also let you work delicate areas without leaving marks. Using the right head and punch for each task keeps everything looking clean.






Reviews
There are no reviews yet.