$89.99
18 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you've ever fought a castle nut with the wrong tool and buggered up an end plate, you already know why a purpose-built wrench matters. The Real Avid Armorer's Master Wrench packs the whole AR-15 armory into a single stainless steel unit, with an ergonomic handle that gives you the leverage to break free barrel and castle nuts that have practically welded themselves on from years of heat cycles. The deep-set sockets seat squarely and grip without slipping, so you're putting force into the nut instead of chewing up your parts.
This thing covers the real work. You get a Mil-Spec barrel nut wrench sized for Delta Ring style barrel nuts, plus a free-float barrel nut wrench built with a 10-post design for a tighter, stronger fit on modern handguard nuts. There's a castle nut wrench that plays nice with both Mil-Spec and aftermarket end plates, and a dual-function muzzle device wrench in 3/4-inch and 5/8-inch sizes. That same 5/8-inch fitting handles fixed stock receiver extensions too, so building out a classic A2 setup is covered.
One of the smarter touches is the built-in 1/2-inch torque wrench receiver, positioned so you can dial in accurate, consistent torque on any of the wrenches. Barrel nuts, castle nuts, and muzzle devices all have real spec ranges, and Real Avid engraved reference torque values right into the tool so you're not digging through a manual mid-build. Get the numbers right and you avoid loose parts or over-torqued threads down the road.
The part that sets this one apart is the hammer. It's the only wrench in its class that doubles as a full armorer's hammer, with a fixed steel head plus interchangeable brass, nylon, and rubber heads that thread on. That means one tool goes from heavy strikes to delicate, non-marring taps for staking pins or seating parts. At just over 16 inches long, it's got the reach and heft to move stubborn hardware while still fitting in a range bag or tool drawer.
It handles the core AR-15 assembly and maintenance tasks in one tool. You can install or remove Mil-Spec and free-float barrel nuts, castle nuts, muzzle devices, and fixed stock receiver extensions. It also converts into an armorer's hammer for staking pins and seating parts.
Yes. It has a built-in 1/2-inch torque wrench receiver positioned near all of the wrench fittings, so you can apply accurate, consistent torque to any nut. Reference torque specs are engraved right into the tool so you don't have to hunt them down.
It's designed to work with both Mil-Spec and aftermarket end plates, so most common setups are covered. The deep-set fitting seats squarely to grip the castle nut without slipping or marring it. That said, some heavily oversized or unusually shaped aftermarket end plates may need a dedicated tool.
The big difference is that it doubles as a full armorer's hammer, which most wrenches in this class don't offer. It ships with a fixed steel head plus threaded brass, nylon, and rubber heads for everything from heavy strikes to non-marring taps. Combined with the stainless build and integrated torque receiver, it replaces several separate tools on the bench.
| UPC | 813119012464 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | AVAR15AMW |
| Color | Gray |
| Length | 16.6500 |
| Model | |
| Product Type | Wrench |
| Quantity | 1 |
| Shipping Weight | 1.92 |
| Style | Armorers |
You must be logged in to post a review.
Reviews
There are no reviews yet.