Description
Bravo Company built the MK2 Recoil Mitigation System around a simple idea: reduce what you feel at the shoulder while keeping your rifle running dead reliable. The Mod 1 T1 configuration centers on a 4.7oz buffer paired with an M16A4 rifle spring inside an intermediate-length receiver extension that sits roughly 3/4 inch longer than a standard carbine tube. That extra travel spreads the recoil impulse over a longer stroke, which is what gives this setup its noticeably smoother, softer push instead of the sharp snap you get from a bare-bones carbine buffer.
What the T1 Buffer Does Differently
The secret sauce here is BCM's patented buffer design. Inside the body is an internal spring that manages the counterweights, cutting down on the annoying "twang" and rattle you hear with cheaper buffers while keeping weight placement consistent shot to shot. That translates to less bolt bounce and a more predictable carrier velocity, which is really the whole point. At 4.7 ounces, the T1 lands in a great spot for a standard 16-inch 5.56 carbine, calming things down without over-buffering to the point of short-stroking.
Why the MK2 System Runs So Smooth
Because the whole kit is tuned to work together, you're not guessing at spring rates or stacking mismatched parts. Folks running it on 16-inch builds and even adjustable gas setups have described the cycle as glass-smooth, with some saying it feels close to dry firing. The longer spring widens the operating envelope too, so the rifle tends to run more consistently across different ammo and gas system lengths. If you shoot a red dot or LPVO, that flatter impulse makes it a lot easier to spot your own hits and drive fast follow-up shots.
Built the BCM Way
Every piece is made from 7075-T6 aluminum and hard coat anodized for the kind of durability BCM has built its name on. It's a complete kit that bolts onto any Mil-Spec lower and Mil-Spec stock, so installation is straightforward with basic tools. One thing worth knowing: because the MK2 extension runs a touch longer than a carbine tube, some Mil-Spec stocks may not collapse all the way flush to the castle nut. The MK2 buffer is designed to run only with the included BCM MK2 receiver extension and rifle spring, so keep the system together for it to work as intended.
Key Specifications
- Manufacturer: Bravo Company Mfg / BCM
- Model: MK2 Recoil Mitigation System Mod 1 T1
- Manufacturer Part Number: BCM-MK2RMS-M1T1
- UPC: 812526023117
- Product Type: Complete Buffer Tube Assembly
- Buffer Weight: Approximately 4.7 oz
- Buffer Material: 7075-T6 Aluminum, Hard Coat Anodized
- Spring: Mil-Spec M16A4 Rifle Action Spring
- Receiver Extension: MK2, approx. 3/4" longer than carbine, 8-position, Mil-Spec diameter
- Platform: AR-15 / Mil-Spec Lower
- Color: Black
- Style: Mil-Spec
- Patent: US Patent #10415907
What’s Included
- MK2 Mod 1 T1 Buffer (approximately 4.7 oz)
- Mil-Spec M16A4 Rifle Action Spring
- MK2 Receiver Extension (8-position, Mil-Spec diameter)
- Castle Lock Nut
- M4 Receiver QD End Plate with mount for QD swivel
Frequently Asked Questions
What rifle setup is the MK2 Mod 1 T1 best suited for?
The 4.7oz T1 buffer is a sweet spot for a standard 16-inch 5.56 carbine, where it calms felt recoil and smooths out cycling. If you're running something shorter, suppressed, or in a heavier caliber, BCM makes lighter and heavier options in the same family to fine-tune your setup. For most 16-inch 5.56 builds, the T1 is the go-to choice.
Will the BCM MK2 Recoil Mitigation System work with my existing buffer tube?
No, this system is designed to run as a complete unit. The MK2 buffer only works with the included BCM MK2 receiver extension and M16A4 rifle spring, since the intermediate-length tube is what gives you the longer, smoother stroke. Swapping in a standard carbine tube or a different spring can cause problems, so keep the kit together as it ships.
Is installation of the MK2 Recoil Mitigation System difficult?
Not at all. It bolts onto any Mil-Spec lower with basic tools, and since it comes as a matched kit you're not guessing at spring rates or stacking mismatched parts. A castle nut wrench and a little care torquing things down will get you up and running.
Why does my stock not collapse all the way after installing the MK2 system?
Because the MK2 receiver extension runs about 3/4 inch longer than a standard carbine tube, some Mil-Spec stocks won't fully collapse flush to the castle nut. This is normal and expected with the intermediate-length design. That extra length is exactly what allows the buffer to travel farther and soften the recoil impulse.




Reviews
There are no reviews yet.