0
0

MK2 BUFFER MOD 1 – T4

UPC: 812526023094

$241.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The BCM MK2 Buffer Mod 1 T4 is the top of Bravo Company's four-weight tuning ladder, coming in at 7.4 ounces. It's built as a standalone piece for folks who already run the MK2 Recoil Mitigation System and want to fine-tune how their rifle behaves. If your gun is throwing brass way out front or slamming the bolt back harder than it needs to, the extra mass here slows the carrier down and evens out the whole cycle. That added weight also delivers more chambering force and helps fight bolt bounce, which is where the reliability and accuracy gains come from.

Where the T4 Buffer Earns Its Keep

This is the buffer to reach for when a rifle is genuinely over-gassed, and it shines on suppressed builds where the extra backpressure pushes ejection timing forward and speeds everything up. A good rule of thumb: watch your brass. If empties are consistently landing forward of 3 o'clock, the gun is running hot and stepping up to a heavier buffer like the T4 helps pull that ejection pattern back to the 3 to 4:30 sweet spot. It's the same idea whether you're shooting can-on or bare muzzle, you're just matching the buffer weight to how hard the system is being driven.

What Makes the MK2 Mod 1 Different

The MK2 design leans on a longer receiver extension and buffer, which makes room for a fourth internal weight instead of the three you'd find in a standard carbine buffer. Paired with the M16A4 rifle-length action spring, that longer spring spreads the load across more coils and widens the operating envelope, so the rifle gets less picky about ammo, fouling, and weather. There's also an internal biasing spring that keeps the counterweight seated toward the front face, cutting down on that hollow boing noise and keeping carrier velocity consistent shot to shot.

Fitment Worth Knowing Before You Order

The T4 is built from 7075-T6 aluminum with a hard-coat anodized finish, so it's made to log serious round counts. Just keep in mind this is a semi-proprietary system: it only works with the BCM MK2 receiver extension and the Mil-Spec M16A4 rifle action spring. It won't drop into a standard carbine tube, so you'll want the full MK2 setup already in place before adding this one.

Key Specifications

  • Manufacturer: Bravo Company Mfg / BCM
  • Model: MK2 Buffer Mod 1 – T4
  • Manufacturer Part Number: BCM-BFMK2-M1-T4
  • UPC: 812526023094
  • Buffer Weight: 7.4 oz
  • Material: 7075-T6 Aluminum
  • Finish: Hard Coat Anodized, Matte Black
  • Color: Black
  • Buffer Type: Intermediate Length
  • Platform: AR-15
  • Compatibility: BCM MK2 Receiver Extension and M16A4 Rifle Action Spring only
  • Product Type: Buffer

What’s Included

  • BCM MK2 Buffer Mod 1 – T4 (7.4 oz) buffer

Frequently Asked Questions

Will the MK2 T4 buffer work in a standard carbine buffer tube?

No. The MK2 Mod 1 buffer is a semi-proprietary design that only functions with the BCM MK2 receiver extension and the Mil-Spec M16A4 rifle action spring. It will not fit a standard carbine tube, and running it in an incompatible setup can damage the rifle. You'll need the full MK2 Recoil Mitigation System in place before adding this buffer.

How do I know if I need the heavier T4 buffer instead of a lighter weight?

Watch your ejection pattern. If brass is consistently landing forward of 3 o'clock, your rifle is over-gassed and would benefit from more buffer weight to pull that pattern back toward the 3 to 4:30 range. The T4 is the heaviest in the lineup at 7.4 oz, so it's the pick for the most over-gassed setups, particularly suppressed builds.

Is the T4 a good choice for a suppressed AR build?

It can be a strong option. Suppressors add backpressure to the system, which speeds up cycling and throws ejection timing forward, so a heavier buffer helps counter that. The T4's 7.4 oz mass slows the carrier down and smooths out the cycle when the gun is being driven hard by a can.

What's included with the BCM MK2 T4 buffer?

This is the buffer only, sold as a standalone tuning component. It's meant for rifles that already run the complete MK2 Recoil Mitigation System, so the receiver extension and action spring are not included. If you're building from scratch, you'll want the full RMS kit first.

Additional information

UPC

812526023094

Manufacturer

Manufacturer Part Number

BCM-BFMK2-M1-T4          

Color

Black

Model

Product Type

Buffer

Reviews

There are no reviews yet.

Be the first to review “MK2 BUFFER MOD 1 – T4”