0
0

BCM MK2 Buffer Mod 1 – T1 (4.7 oz) | AR-15 Tuning Buffer

UPC: 812526023063

$78.70

36 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The BCM MK2 Buffer Mod 1 – T1 is a standalone 4.7 oz buffer meant for one job: dialing in a rifle that's already built around BCM's MK2 recoil mitigation system. If your ejection pattern is throwing brass too far forward or you want to adjust how the gun cycles after adding a can, this is the weight that lets you tune it without swapping out the whole assembly. It's the lightest option in the four-weight MK2 series, which runs from the T1 at 4.7 oz up through the T4 at 7.4 oz.

What the MK2 Buffer Mod 1 – T1 Brings to the Table

This buffer is machined from 7075-T6 aluminum with a hard-coat anodized finish, so it holds up to high round counts without losing its characteristics. Inside, an internal counterweight gets more travel than a standard carbine buffer, which cuts down on bolt bounce and keeps carrier velocity consistent shot to shot. There's also an internal biasing spring that keeps the weights seated toward the front face, so you get quieter cycling and more predictable timing every time the bolt comes back into battery.

Getting the Most Out of the T1 Weight

Buffer tuning comes down to watching your brass. When empties are landing between 3:00 and 4:30, you're in the sweet spot. If your gun is dumping brass forward of 3:00, it's over-gassed and could use a heavier weight, so stepping up to a T2 is a common next move. The T1 is the starting point for many suppressed short-barrel builds and lighter setups where you want just enough mass to smooth things out without slowing the action too much.

Fitment You Need to Know

The MK2 Buffer Mod 1 – T1 is semi-proprietary. It only works inside the BCM MK2 receiver extension paired with a Mil-Spec M16 rifle-length action spring. It will not fit a standard carbine buffer tube, and it isn't a drop-in for a plain carbine setup, so make sure the MK2 system is already on your rifle before ordering.

Key Specifications

  • Manufacturer: Bravo Company Mfg / BCM
  • Model: MK2 Buffer Mod 1 – T1
  • Manufacturer Part Number: BCM-BFMK2-M1-T1
  • UPC: 812526023063
  • Buffer Weight: 4.7 oz
  • Length: Intermediate
  • Material: 7075-T6 Aluminum
  • Finish: Hard-Coat Anodized, Matte Black
  • Color: Black
  • Product Type: Buffer
  • Compatibility: BCM MK2 Receiver Extension with Mil-Spec M16 Rifle Action Spring
  • Platform: AR-15
  • Country of Origin: USA

What’s Included

  • BCM MK2 Buffer Mod 1 – T1 (4.7 oz)

Frequently Asked Questions

Will the MK2 Buffer Mod 1 – T1 fit my standard AR-15 carbine buffer tube?

No. This buffer is designed exclusively for the BCM MK2 receiver extension paired with a Mil-Spec M16 rifle-length action spring. It will not fit a standard carbine buffer tube, so you'll need the MK2 system already installed on your rifle to run it.

How do I know if the 4.7 oz T1 is the right weight for my build?

Watch where your brass lands. Ejection between roughly 3:00 and 4:30 is what you're after. The T1 is the lightest option in the MK2 lineup and works well for suppressed short-barrel builds and setups that don't need much extra mass, but if you're getting forward ejection you may want to step up to a heavier weight.

Does the BCM MK2 Buffer T1 work with a suppressor?

It can, depending on your gas system. Suppressors add backpressure and often push ejection forward, so some shooters running a can find they need a heavier buffer like the T2 to calm things down. Start with the T1, check your ejection pattern, and move up if the brass is landing too far forward.

What's inside the MK2 Buffer that makes it different from a regular buffer?

The MK2 buffer uses an internal counterweight with more travel than a standard carbine buffer, which reduces bolt bounce and keeps carrier velocity consistent. It also has an internal biasing spring that holds the weights toward the front face for quieter, more repeatable cycling. The body is 7075-T6 aluminum with a hard-coat anodized finish for durability.

Additional information

UPC

812526023063

Manufacturer

Manufacturer Part Number

BCM-BFMK2-M1-T1           

Color

Black

Model

Product Type

Buffer

Reviews

There are no reviews yet.

Be the first to review “BCM MK2 Buffer Mod 1 – T1 (4.7 oz) | AR-15 Tuning Buffer”