Description
The BCMGUNFIGHTER Vertical Grip Mod 3 is Bravo Company's answer to the wobbly, screw-and-nut foregrips that plague a lot of AR builds. Instead of the usual clamp setup, it uses the BCM Direct Mount Picatinny 1913 interface, which extends an internal anchor to grab the rail slots and spread recoil force across the whole grip. The result is a lockup that stays put shot after shot with no play or shifting, and installation only takes a T15 Torx driver.
Why the Mod 3 Grip Earns Its Spot on the Rail
This is the ultra-light version of BCM's Short Vertical Grip, trimmed down to a scant 1.9 ounces. The low-profile length keeps it out of the way for better mobility and a lower snag factor, which matters when you're moving around barriers or transitioning positions. The forward angle stiffens up the forearm and gives your wrist a more natural resting position, and if that angle isn't your thing, you can flip the grip and run it in reverse to help pull the handguard and grip together for even more control.
Grip Texture and Build You Can Count On
Molded from high-impact, impact-resistant polymer in Flat Dark Earth, the Mod 3 has flat sides paired with an aggressive texture. That combination gives you solid yaw control during both firing and non-firing manipulations, so your hand stays indexed the same way every time you come up on the gun. BCM built its name on tight tolerances and serious quality control, and this grip carries that reputation. It's made in the USA and holds up to the kind of abuse a hard-use rifle sees.
Simple Install, Serious Hold
Setup is refreshingly easy. Push your tool into the screw to extend the Picatinny anchor, slide the grip onto the rail to your preferred spot, orient it forward or back, then tighten it down so the recoil lug seats into the rail grooves. No backing nuts to fumble with, no shifting once it's snug. Whether you're building a duty rifle or dialing in a range gun, this is a clean, dependable way to add a forward grip.
Key Specifications
- Manufacturer: Bravo Company Mfg / BCM
- Manufacturer Part Number: BCM-VG-1913-MOD-3-FDE
- UPC: 812526020161
- Model: Mod 3 – Picatinny (1913)
- Product Type: Vertical Foregrip
- Mounting Interface: BCM Direct Mount Picatinny 1913
- Color / Finish: Flat Dark Earth
- Material: High-impact, impact-resistant polymer
- Weight: 1.9 ounces
- Length: 8.65 in (packaged)
- Grip Angle: Forward angle, reversible
- Install Tool: T15 Torx driver
- Country of Origin: Made in the USA
What’s Included
- 1x BCMGUNFIGHTER Vertical Grip Mod 3 – Picatinny (FDE)
Frequently Asked Questions
What rail does the BCM Vertical Grip Mod 3 fit?
This version is built specifically for Picatinny 1913 rails and handguards. It uses the BCM Direct Mount interface, where an internal anchor extends into the rail slots for a rigid, no-wiggle lockup. If your handguard runs M-LOK or KeyMod instead, BCM offers Mod 3 grips cut for those systems.
How does the Mod 3 grip attach and what tool do I need?
Installation only requires a T15 Torx driver. You push the tool into the screw to extend the Picatinny anchor, slide the grip onto the rail to your preferred spot, then tighten it down so the recoil lug seats into the rail grooves. There are no backing nuts to fumble with, and it stays put once it's snug.
Can the BCMGUNFIGHTER Mod 3 grip be mounted at an angle?
Yes. It comes with a forward angle that stiffens the forearm and gives your wrist a more natural position. You can also flip it and run it in reverse angle, which helps when you want to pull the handguard and grip together for extra control.
How heavy is the BCM Vertical Grip Mod 3?
It weighs just 1.9 ounces, making it one of the lighter vertical foregrips out there. It's the ultra-light version of BCM's Short Vertical Grip, so you get a solid handhold without adding meaningful weight to the front of your rifle.





Reviews
There are no reviews yet.