0
0

Midwest Industries Combat Rail LW 14″ M-LOK Handguard – AR-15

UPC: 812102032229

$215.95

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Midwest Industries Combat Rail LW is built for folks who want their AR-15 to feel quick and balanced up front. At 14 inches it stretches out over a mid-length or rifle-length gas system while keeping the profile tight, with a 1.3-inch inside diameter and a 1.5-inch outside diameter that sits comfortably in the support hand. Machined from 6061-T6 aluminum and given a Type III hardcoat anodized finish, it comes fully dehorned and deburred so there are no sharp edges digging into your palm during a long day at the range.

What Sets the Combat Rail LW Apart

The whole thing runs on a one-piece free-float design, which means the handguard clamps to its own barrel nut and never touches the barrel. That translates to more consistent accuracy since nothing you hang off the rail puts pressure on the barrel. A continuous MIL-STD 1913 Picatinny top rail lines up cleanly with your upper for backup irons or a light-and-optic setup, and you get M-LOK slots across the remaining sides for lights, lasers, grips, and hand stops right where you want them. Two integral anti-rotation QD sling sockets, one on each side, give you a steel-lined, solid sling attachment point without eating up M-LOK real estate.

Getting the Combat Rail LW on Your Rifle

Installation is where this rail really earns its keep. It ships with a 4140 heat-treated steel barrel nut, a patented 4140 heat-treated torque plate, clamp screws, and the wrench you need to tighten the nut. The torque plate indexes the handguard so it can't rotate or shift front to back, and the design skips the fussy timing you deal with on old-school setups. Plan on a torque wrench for the barrel nut and you'll have it buttoned up in a few minutes.

A quick fitment note: this one is made for standard forged upper receivers and is not designed for gas piston AR builds. If you're running a billet upper, it's worth checking dimensions with your upper's maker first since those vary from brand to brand.

Key Specifications

  • Manufacturer: Midwest Industries
  • Manufacturer Part Number: MI-CRLW14
  • UPC: 812102032229
  • Model: Combat Rail Lightweight M-LOK
  • Length: 14 in
  • Type: One-Piece Free Float
  • Attachment Style: M-LOK
  • Top Rail: MIL-STD 1913 Picatinny
  • Material: 6061-T6 Aluminum
  • Finish: Type III Hardcoat Anodized
  • Color: Black
  • Inside Diameter: 1.3 in
  • Outside Diameter: 1.5 in
  • Barrel Nut: 4140 Heat-Treated Steel
  • Fits: AR-15, Standard Forged Upper Receivers
  • Made In: USA

What’s Included

  • Combat Rail LW 14" M-LOK handguard
  • 4140 heat-treated steel barrel nut
  • 4140 heat-treated torque plate
  • Clamp screws / mounting hardware
  • Barrel nut wrench
  • 5-slot polymer M-LOK rail section

Frequently Asked Questions

Will the Combat Rail LW fit my AR-15?

It's designed for AR-15 rifles with standard forged upper receivers and comes with its own barrel nut and torque plate for the install. It is not made for gas piston AR builds. If you're running a billet upper, dimensions vary between makers, so it's smart to confirm fit with your upper receiver's manufacturer before ordering.

What gas system length works best with the 14-inch version?

The 14-inch length pairs well with mid-length and rifle-length gas systems and clears the gas block on most standard barrels. It gives you a lot of real estate for accessories and a longer support-hand reach. If you're planning to run a suppressor, just make sure your barrel and muzzle device leave enough room past the front of the rail.

Do I need special tools to install the Combat Rail LW?

The handguard ships with the barrel nut, torque plate, clamp screws, and the barrel nut wrench, so you're mostly covered out of the box. You'll want a torque wrench to properly tighten the barrel nut and a set of Allen wrenches for the clamp screws. The torque plate indexes everything so the rail can't rotate, and most people have it installed in just a few minutes.

What accessories can I mount on it?

You get a continuous Picatinny top rail for optics and backup iron sights, plus M-LOK slots across the sides for lights, lasers, vertical grips, and hand stops. It also has two integral QD sling sockets, one on each side, for a solid sling attachment. A 5-slot polymer M-LOK rail section is included to get you started.

Additional information

UPC

812102032229

Manufacturer

Manufacturer Part Number

MI-CRLW14

Color

Black

Length

14

Model

Product Type

Free Float

Style

M-LOK

Reviews

There are no reviews yet.

Be the first to review “Midwest Industries Combat Rail LW 14″ M-LOK Handguard – AR-15”