0
0

Midwest Industries T-Series 12.625″ Quad Rail Handguard for AR-15

UPC: 812102031109

$209.95

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Midwest Industries has been quietly building some of the best AR furniture in the business for years, and the Combat Rail T-Series is a great example of why folks keep coming back. This 12.625-inch version gives you a true one-piece free-float handguard with continuous MIL-STD 1913 Picatinny running along all four sides at the 12, 3, 6, and 9 o'clock positions. The top rail lines up flush with your upper receiver for that clean monolithic look, and every section is T-marked so you can note exactly where your optics, lights, and lasers land and get them back to zero every time.

Because it free-floats, nothing touches the barrel but the barrel nut itself. That keeps your barrel harmonics consistent and lets you lean on the rail with a bipod, vertical grip, or a firm support hand without throwing off your point of impact. The whole thing is machined from 6061 aluminum with a Type 3 hardcoat anodized finish, then fully dehorned and deburred so there are no sharp edges digging into your palm during a long range day.

Getting the T-Series Combat Rail Mounted

This is one of the more forgiving free-float rails to install. It comes with a 4140 heat-treated barrel nut, the patented torque plate, and the barrel nut wrench, so there's no timing the nut, no shims, and no adhesive required. You slide the rail over the nut, drop the torque plate into the slot underneath, line up the anti-rotation tabs against your upper, and snug down the cross-bolts. You'll want a proper inch-pound torque wrench on hand to finish the job right.

What the 12.625-Inch Quad Rail Works Best For

The extra reach on this length is handy for mid-length and rifle-length gas setups where you want to run your hand and accessories further out. Two integral anti-rotation QD sling sockets are built into the rear for a quick sling attachment point. Keep in mind it's designed around standard forged AR-15 uppers, so if you're running a billet upper it's worth checking dimensions first.

Key Specifications

  • Manufacturer: Midwest Industries
  • Manufacturer Part Number: MI-CRT12.625
  • UPC: 812102031109
  • Length: 12.625 in
  • Rail Type: MIL-STD 1913 Picatinny Quad Rail (T-marked)
  • Design: One-Piece Free Float
  • Material: 6061 Aluminum
  • Finish: Type 3 Hardcoat Anodized
  • Color: Black
  • Barrel Nut: 4140 Heat-Treated Steel
  • Inside Diameter: 1.3 in
  • Dimensions: 2.43 in tall x 2.15 in wide
  • Installed Weight: 14.6 oz
  • QD Sling Sockets: Two integral anti-rotation
  • Fit: Standard forged AR-15 uppers
  • Origin: Made in the USA

What’s Included

  • T-Series Combat Rail handguard (12.625 in)
  • 4140 heat-treated barrel nut
  • Patented torque plate
  • Barrel nut wrench
  • Hex keys
  • Five-slot M-LOK accessory rail section

Frequently Asked Questions

What does the T-Series quad rail handguard come with for installation?

Everything you need to mount it is in the box, including the 4140 heat-treated barrel nut, the patented torque plate, the barrel nut wrench, and hex keys. The design skips the timing, shims, and adhesive that older rails required, so it's a straightforward job. You will still want a proper inch-pound torque wrench to finish it correctly.

Will this Midwest Industries handguard fit my AR-15 upper?

It's built to fit standard forged AR-15 upper receivers, which covers the vast majority of rifles out there. If you're running a billet upper, dimensions vary between manufacturers, so it's smart to confirm fit before ordering. It is not intended for gas piston AR platforms.

Why choose a free-float rail over a standard handguard?

A free-float design like the T-Series doesn't touch the barrel anywhere except the barrel nut. That keeps your barrel harmonics consistent even when you're loading up the rail with a bipod, grip, or support-hand pressure. The result is better shot-to-shot consistency compared to a drop-in handguard that contacts the barrel.

Can I mount accessories on all four sides of this quad rail?

Yes, the T-Series gives you continuous MIL-STD 1913 Picatinny at the 12, 3, 6, and 9 o'clock positions along the full length. Every section is T-marked so you can log exactly where lights, lasers, grips, and optics sit and return them to the same spot. There are also two integral QD sling sockets at the rear.

Additional information

UPC

812102031109

Manufacturer

Manufacturer Part Number

MI-CRT12.625

Color

Black

Length

12.625''

Product Type

Picatinny

Reviews

There are no reviews yet.

Be the first to review “Midwest Industries T-Series 12.625″ Quad Rail Handguard for AR-15”