Description
Ever have a favorite hunting rifle wearing locking swivel studs while the sling you actually want to use is sewn with push-button swivels? The GrovTec Multi-Adaptor Stud Set solves that headache. It drops a standard swivel stud right into your push-button base, opening the door to locking swivels, bipods, and any accessory that mounts to a traditional stud. No permanent changes, no fighting mismatched hardware.
How the Multi-Adaptor Stud Set Goes On
Installation is refreshingly simple. You slide the adaptor into your full-rotation base, push the included hex wrench down through the top hole to depress the internal plunger, and it locks in place. Popping it back out works the same way. A handy trick from GrovTec is to loop a bit of string around the adaptor and pull up while pressing the plunger, which makes removal easier. The included heavy-duty bases do call for a little gunsmithing if you're starting fresh: drill a 0.5 inch hole roughly 9/16 to 5/8 inch deep and tap it with a 9/16-18 UNF tap.
What Comes in the GTSW299 Set
The black stainless build gives you corrosion resistance and a low-glare look that blends in on a hunting or field gun. You get two adaptors and two stainless steel bases in the box, which covers both the front and rear mounting points on most rifles and shotguns. GrovTec backs its accessories with a lifetime warranty, so this is gear meant to stay in service for the long haul.
Worth noting: this adaptor is designed for full-rotation push-button bases only. Keep it off non-rotating or limited-rotation mounts and it'll do exactly what you need. For anyone juggling multiple slings across a few guns, it's a small, inexpensive part that saves you from buying duplicate hardware.
Key Specifications
- Manufacturer: GrovTec
- Manufacturer Part Number: GTSW299
- UPC: 811071012997
- Color: Black
- Material: Stainless Steel
- Product Type: Swivel Stud Adaptor
- Style: Rifle Swivels
- For Use With: Full-Rotation Push-Button Swivel Bases
- Base Thread Pitch: 9/16-18 UNF
- Install Hole: 0.5 in diameter, 9/16 to 5/8 in deep
- Quantity: 2 Adaptors, 2 Stainless Steel Bases
- Warranty: Lifetime
What’s Included
- 2 Multi-Adaptors
- 2 Stainless Steel Bases
- Allen (hex) wrench for installation
Frequently Asked Questions
What does the GrovTec Multi-Adaptor Stud Set let me attach?
It converts a push-button swivel base into a standard swivel stud. That means you can mount locking swivels, bipods, and any accessory built for a traditional stud. It's the go-to fix when your gun has push-button bases but the sling or gear you want uses standard studs.
Will this Multi-Adaptor work with any push-button base?
It fits standard full-rotation push-button swivel bases. It is not designed for non-rotating or limited-rotation mounts, so check what your setup uses before installing. The included bases give you a full-rotation option if you're starting from scratch.
Do I need to drill and tap to install the included bases?
If you're mounting the included heavy-duty bases fresh, yes. GrovTec recommends drilling a 0.5 inch hole about 9/16 to 5/8 inch deep and tapping it with a 9/16-18 UNF tap. Once your bases are set, the adaptor itself just slides in using the supplied hex wrench, no drilling required.
How do I remove the adaptor once it's installed?
Press the included hex wrench down through the top hole to depress the internal plunger, and the adaptor releases the same way it went in. A useful tip from GrovTec is to hook a string around the adaptor and pull up while depressing the plunger to make removal easier.




Reviews
There are no reviews yet.