0
0

Dead Air KeyMo Muzzle Brake 11/16-24 Big Bore QD Suppressor Mount

UPC: 810128161572

$71.99

70 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Big bore rifles deserve better than a slow, fussy direct-thread setup. The Dead Air KeyMo Muzzle Brake in 11/16-24 (model DA163) handles calibers up to .458 and turns any barrel with that thread pattern into a quick-detach host for KeyMo-compatible suppressors. Spin your Sandman or KeyMo adapter-equipped can on in seconds, and the tapered lockup with mechanical detent holds tight through heat and vibration without wandering loose.

Why the KeyMo 46 Brake Earns Its Spot on a Big Bore

One of the smartest details on this mount is the muzzle-seating design. Plenty of big bore and lever gun barrels have little to no shoulder at the muzzle, which usually means fiddling with shim kits to get a brake timed right. The KeyMo 46 seats against the muzzle itself, so no shims are needed and installation is refreshingly simple. The taper interface sits forward of the locking channels, which keeps carbon from welding your suppressor to the mount. Even after a long day of shooting, the can comes off clean.

Built From 4140 Steel With Suppressor Life in Mind

Dead Air machines this brake from 4140 heat-treated alloy steel and coats it in black nitride, so it shrugs off the pressure and heat of living inside a suppressor. The ports are cut to distribute gas evenly into the can, which supports consistent performance and helps extend the service life of your silencer. Run it bare and it still works as a legitimate brake, cutting felt recoil and muzzle rise so your .450 Bushmaster or .458 SOCOM stays flatter for follow-up shots. At 2.58 inches long and around 3.2 ounces, it adds very little bulk to the end of your barrel.

Pairing the DA163 With Your Suppressor

This mount works with all Dead Air KeyMo adapter-equipped silencers, so if you run a Sandman series can or a Nomad with a KeyMo adapter, you are set. Just keep your suppressor's bore rating in mind when matching it to a big bore host. For anyone building out a .45 caliber class rifle as a suppressor host, this is the mounting piece that ties the whole setup together.

Key Specifications

  • Manufacturer: Dead Air Silencers
  • Manufacturer Part Number: DA163
  • UPC: 810128161572
  • Model: KeyMo 46 Muzzle Brake
  • Thread Pattern: 11/16"x24
  • Caliber Rating: Up to .458 (.46 cal bore)
  • Material: 4140 Heat-Treated Alloy Steel
  • Finish: Black Nitride
  • Color: Black
  • Overall Length: 2.58 inches
  • Weight: 3.2 oz
  • Compatibility: All Dead Air KeyMo adapter-equipped suppressors
  • Mounting Style: Muzzle-seating, no shims required

What’s Included

  • Dead Air KeyMo 46 Muzzle Brake, 11/16-24

Frequently Asked Questions

Which suppressors work with the Dead Air KeyMo Muzzle Brake?

This brake is compatible with all Dead Air suppressors equipped with the KeyMo mounting system, including the Sandman series and cans like the Nomad running a KeyMo adapter. Just make sure your suppressor's bore is rated for the caliber of the host rifle, since this mount handles projectiles up to .458.

Do I need shims to install the KeyMo 46 brake?

No. Unlike the standard KeyMo brakes, the 46 version uses a muzzle-seating design that indexes off the muzzle itself rather than a barrel shoulder. That means no shim kit is needed, which is a real convenience on big bore and lever gun barrels that often have little to no shoulder at the threads.

What rifles is the 11/16-24 thread pattern typically found on?

The 11/16-24 pattern is common on big bore platforms like .450 Bushmaster and .458 SOCOM rifles. If your barrel is threaded 11/16-24 and your bullet diameter is .458 or under, this brake is a fit. Always verify your barrel's thread pitch before ordering.

Will the suppressor carbon lock onto this mount after heavy use?

Dead Air designed the tapered sealing surface to sit forward of the locking channels, which keeps carbon buildup from seizing the suppressor to the brake. Even after high round counts, the can comes off cleanly by hand. It is one of the reasons the KeyMo system has such a strong reputation among suppressor owners.

Additional information

UPC

810128161572

Manufacturer

Manufacturer Part Number

DA163

Caliber/Gauge

.45 Caliber

Color

Black

Length

6

Model

Package Height

1.0

Package Width

4.5

Product Type

Accessory-Muzzle Brakes

Shipping Weight

0.2

Thread Pattern

11/16"x24

Reviews

There are no reviews yet.

Be the first to review “Dead Air KeyMo Muzzle Brake 11/16-24 Big Bore QD Suppressor Mount”