$48.99
26 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Running a 6.5 Creedmoor, 6mm ARC, or .25 caliber wildcat through a .30 cal can works fine, but you're leaving performance on the table with all that extra bore diameter up front. That's exactly what this cap fixes. The Dead Air DA205 is a caliber-specific front cap sized for 6.5mm, covering .24 through .27 caliber cartridges, and it threads onto R-Series compatible Dead Air silencers like the Sandman-S and Sandman-L in place of the standard .30 cal cap.
Tightening up the exit bore does a few noticeable things. First-round pop drops, which is one of the more satisfying upgrades you can make to a suppressed rifle. You'll also typically pick up a few decibels of extra sound reduction at the muzzle since less gas escapes around the smaller projectile. On top of that, the tighter aperture helps with flash mitigation and changes the backpressure characteristics of the can, so you can dial in how your whole setup behaves. It's a small part that punches well above its size.
The cap wears a Black Nitride finish, the same hard-use treatment Dead Air runs on plenty of their gear, so it shrugs off carbon, heat, and weather without fuss. Swapping caps is a quick job, and Dead Air's front cap tool makes removal easy even after the threads have seen some carbon buildup. Keep your original .30 cal cap in the range bag and you can switch between calibers on the same silencer whenever you want.
If your Sandman spends most of its life on a 6.5 Creedmoor, 6.5 Grendel, .243, or .270 build, this is one of the cheapest and easiest performance bumps you can make. One cap, a couple minutes of install time, and your can is purpose-fit to the cartridge instead of running oversized.
The DA205 is built for Dead Air's R-Series front cap pattern, which covers the Sandman-S and Sandman-L. It won't fit the Sandman-K since that model has a fixed front cap. If you're unsure about your specific can, Dead Air publishes a fitment guide that lists every compatible model.
Matching the cap to your bore reduces first-round pop and typically lowers the sound reading at the muzzle by a few decibels compared to running the standard .30 cal cap. It also tightens up flash signature and changes backpressure behavior. It's a simple way to squeeze more performance out of a can you already own.
No. The 6.5mm cap is sized for .24 to .27 caliber projectiles, so a .30 cal bullet will strike the cap. Swap back to your original .30 cal front cap before running anything larger than .270 through the silencer.
You can usually thread it on and off by hand when everything is clean, but Dead Air makes a front cap tool that's well worth having. After a few hundred rounds, carbon can lock the cap down and the tool gives you the leverage to break it free without marring the finish.
| UPC | 810128160940 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | DA205 |
| Caliber/Gauge | .24-.27 |
| Color | Black |
| Length | 7 |
| Model | |
| Package Height | 0.4 |
| Package Width | 4.5 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.045 |
You must be logged in to post a review.
Reviews
There are no reviews yet.