0
0

Dead Air Xeno A1 Flash Hider 5/8-24 .30 Cal Suppressor Mount DA122

UPC: 810128160636

$71.99

128 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

At first glance the Dead Air Xeno A1 looks like the familiar birdcage flash hider that's been knocking down muzzle flash for decades. Look closer and you'll find precision-machined threads that turn it into one half of Dead Air's Xeno taper-mount system. Thread it onto a 5/8-24 barrel and it does its job just fine on its own. Add a Xeno Adapter equipped suppressor and you've got a quick-attach mount with the kind of repeatability and return to zero that precision rifle guys care about, with no timing needed on the mount interface.

Why the Xeno A1 Design Earns Its Keep

One of the smarter details here is how shallow the flash hider sits in the blast chamber. Instead of a long device poking deep into your can and hammering the first baffle, the Xeno A1's shorter lock-up spreads that abuse out, which helps your suppressor last longer and keeps sound performance where it should be. That compact profile also plays nicely with newer suppressors that run smaller blast chambers. The flash hider and adapter mate with left-hand threads, so pulling your suppressor off actually tightens things up rather than loosening the adapter, and you can confirm the mount is snug every time you install the can.

Built Like Dead Air Gear Should Be

The Xeno A1 is machined from 4140 steel with a nitride treatment, giving it a hard, corrosion-resistant surface that shrugs off carbon and copper fouling and resists the thread galling you sometimes see with bare stainless muzzle devices. Wrench flats stay accessible even with a suppressor fully mounted, so you can check torque without tearing your setup apart. At 2.16 inches long and just over 3 ounces, it adds barely anything to the end of your barrel.

Pairing the Xeno Flash Hider With Your Suppressor

This is the 5/8-24 version with a .30 caliber bore, which covers .308, 6.5 Creedmoor, .300 Blackout and similar bores on standard threaded barrels. Grab a Xeno Adapter for your suppressor (sold separately, with industry standard 1-3/8-24 threads that fit the Nomad line and plenty of other cans) and you've got a solid, repeatable mounting setup for multiple rifles.

Key Specifications

  • Manufacturer: Dead Air Silencers
  • Model: Xeno A1 Flash Hider
  • Manufacturer Part Number: DA122
  • UPC: 810128160636
  • Thread Pattern: 5/8"-24
  • Bore Diameter: .30 Caliber
  • Overall Length: 2.16 in
  • Outside Diameter: 0.99 in
  • Weight: 3.20 oz
  • Material: Nitrided 4140 Steel
  • Finish/Color: Black Nitride
  • Wrench Flats: 3/4 in
  • Mount Compatibility: Dead Air Xeno Adapter System

What’s Included

  • Dead Air Xeno A1 Flash Hider (Xeno Adapter sold separately)

Frequently Asked Questions

Can I use the Xeno A1 Flash Hider without a suppressor?

Absolutely. It works as a standalone A1-style birdcage flash hider on any 5/8-24 threaded barrel with a .30 caliber or smaller bore. The Xeno mount threads are just built in and ready whenever you decide to run a suppressor with a Xeno Adapter.

Does the Xeno A1 come with the suppressor adapter?

No, this is the flash hider only. The Xeno Adapter is sold separately and threads onto your suppressor using the industry standard 1-3/8-24 (HUB) pattern, which fits Dead Air's Nomad series and many other cans on the market. A lot of folks buy one adapter and put a Xeno flash hider on each rifle they own.

Why does the Xeno system use left-hand threads between the flash hider and adapter?

It's a clever bit of engineering. Since the adapter mates to the flash hider with left-hand threads, unscrewing your suppressor won't back the adapter off the mount. It also lets you feel that the mount is still tight every time you install the can, so you're never guessing about lock-up.

Will the shallow blast chamber depth really make a difference for my suppressor?

It does over the long haul. Because the Xeno A1 sits shallow in the blast chamber, hot gas erosion gets spread out instead of concentrated on the first baffle, which extends suppressor life. The compact length also means it fits suppressors with smaller blast chambers that longer muzzle devices can't.

Additional information

UPC

810128160636

Manufacturer

Manufacturer Part Number

DA122

Color

Black

Length

4.4500

Model

Package Height

1.1

Package Width

4.2

Product Type

Flash Hider

Shipping Weight

0.195

Thread Pattern

5/8"-24

Caliber/Gauge

.30 Caliber

Reviews

There are no reviews yet.

Be the first to review “Dead Air Xeno A1 Flash Hider 5/8-24 .30 Cal Suppressor Mount DA122”