Description
The Authority Elite upper is Battle Arms Development's take on a next-generation AR-15 top end, and it shows in the details. The centerpiece is the billet BAD556 7075-T6 aircraft-grade aluminum receiver with integral ambidextrous controls and a matching billet handguard. That signature notch cut carries across the receiver and rail for a clean, purpose-built look that sets it apart from a standard forged upper. Since it comes fully assembled and safety inspected, you can pin it onto any mil-spec lower and be ready to run.
What Makes the Authority Elite Upper Tick
The barrel is a 16" 4150 chrome-moly steel piece finished in black nitride, with a 1:7 twist that handles everything from lighter 55-grain loads to heavier 62 and 77-grain bullets. It runs a mid-length gas system, which is the sweet spot on a 16" barrel for smoother cycling, softer recoil, and less wear over time compared to a carbine-length setup. Each barrel is individually head-spaced to its matched bolt for tight, consistent lockup. The .750 gas block journal and 1/2×28 muzzle threads keep it compatible with the aftermarket parts you likely already own.
Rail Space and Ambi Handling on the Authority Elite
The 15" Workhorse free-float M-LOK handguard gives you plenty of real estate for lights, lasers, bipods, and hand stops, with M-LOK slots at the 3, 6, and 9 o'clock positions. Up top, an uninterrupted full-length Picatinny rail lets you mount optics and back-up sights wherever they feel right. The free-float design keeps pressure off the barrel for better accuracy potential.
This one ships complete with the AR-15/M16 bolt carrier group and the Rack-15 C ambidextrous charging handle, so lefties and righties can work the action from either side without swapping parts. Fit and finish on these uppers is a common talking point among owners, and it's easy to see why once you have one in hand. Bolt it to a compatible lower and you've got a serious 5.56 build without piecing together components one at a time.
Key Specifications
- Manufacturer: Battle Arms Development
- Model: Authority Elite
- Manufacturer Part Number: BAD-AUTH-UR16B-Y-15C
- UPC: 810033786082
- Caliber: .223 Rem / 5.56 NATO
- Barrel Length: 16"
- Barrel Material: 4150 Chrome-Moly Steel, Black Nitride
- Twist Rate: 1:7
- Gas System: Mid-Length
- Muzzle Thread: 1/2×28 TPI
- Gas Block Journal: .750"
- Receiver Material: Billet 7075-T6 Aluminum
- Handguard: 15" Workhorse Free-Float M-LOK
- Charging Handle: Rack-15 C Ambidextrous
- Bolt Carrier Group: AR-15/M16, Included
- Color: Black
What’s Included
- Complete Authority Elite 16" upper receiver assembly
- 15" Workhorse free-float M-LOK handguard
- AR-15/M16 bolt carrier group
- Rack-15 C ambidextrous charging handle
Frequently Asked Questions
Is the Authority Elite upper ready to shoot right out of the box?
It comes fully assembled and safety inspected with the bolt carrier group and Rack-15 C charging handle already included. All you need is a compatible mil-spec AR-15 lower receiver to complete the rifle. Pin it on, function check it, and you're set to head to the range.
What twist rate and gas system does the 16" Authority Elite upper use?
The barrel has a 1:7 twist, which stabilizes a wide range of 5.56 and .223 bullet weights from light varmint loads up to heavier match projectiles. It uses a mid-length gas system, which is a great match for a 16" barrel and delivers smoother cycling with less felt recoil than a carbine-length setup.
Does this Authority Elite upper have ambidextrous controls?
Yes. The billet BAD556 receiver features integral ambidextrous controls, and it ships with the Rack-15 C ambidextrous charging handle so you can run the action from either side. Paired with an ambi lower, it makes for a fully left-and-right friendly setup.
Will the muzzle threads accept a suppressor or different muzzle device?
The barrel is threaded 1/2×28, the standard pitch for 5.56 AR-15 barrels, so it accepts the common muzzle devices, brakes, and flash hiders on the market. That also makes it easy to swap on a suppressor-ready device or a can mount if you plan to run a suppressor down the road.








Reviews
There are no reviews yet.