Description
The mil-spec magazine release does the job, but the tiny button and generic catch leave a lot on the table when you're running drills or reloading in a hurry. Battle Arms Development's Enhanced Magazine Release Kit fixes both ends of that equation in one shot. You get the Enhanced Magazine Catch, a magazine catch spring, and the Enhanced Magazine Release button, all in one package so you're not chasing down parts separately for your lower receiver build.
What Sets the BAD Enhanced Magazine Release Apart
The release button (BAD-EMR-B) is CNC machined from billet 7075-T6 aluminum, not the softer 6061 you'll find on some budget parts. It features a fully solid V-shaped face with horizontal serrations and no through hole. That concave groove self-centers your index finger as you press, and the parallel serrations grip in the vertical direction while cutting drag when you drag your finger across it horizontally. In plain terms, it feels great with bare hands or gloves, and folks who've run Magpul and Odin extended releases have swapped to these and stuck with them.
Inside the Enhanced Magazine Release Kit
The magazine catch (BAD-EMC-IC) is investment cast from 8620 heat-treated steel and wears a black phosphate finish for corrosion resistance. What makes it different is the one-piece engineered construction instead of the usual two-piece setup, plus a lightweight fluted design. It also runs a slightly shorter threaded pin, which keeps the installed button profile low and clean on solid-face releases. The whole kit tips the scale right around a quarter to a third of an ounce, so you're not adding weight to a build you've worked hard to keep trim.
Installation is straightforward for anyone who's swapped a mag catch before, and the parts drop into any lower that accepts a mil-spec release button. It's a proven upgrade, built by a Henderson, Nevada company that lives and breathes small arms design, and it plays nicely with the rest of the BAD lineup including the EMMR modular release if you decide to go bigger later.
Key Specifications
- Manufacturer: Battle Arms Development
- Manufacturer Part Number: BAD-MRK-PK1
- UPC: 810033781285
- Model: Enhanced
- Product Type: Magazine Release Kit
- Fits: AR-15 / AR-10 (AR-308)
- Catch Material: 8620 Heat-Treated Steel
- Release Button Material: Billet 7075-T6 Aluminum
- Catch Finish: Black Phosphate
- Release Button Finish: Black Anodized
- Catch Construction: One-Piece Investment Cast, Fluted
- Button Face: Solid V-Groove with Horizontal Serrations
- Compatibility: Mil-Spec Magazine Release Button Footprint
- Color: Black
What’s Included
- 1 x Enhanced Magazine Catch (BAD-EMC-IC)
- 1 x Magazine Catch Spring
- 1 x Enhanced Magazine Release Button (BAD-EMR-B)
Frequently Asked Questions
Will this Enhanced Magazine Release Kit fit both AR-15 and AR-10 rifles?
The Enhanced Magazine Release button works on AR-15 and AR-10 lowers that use a standard mil-spec release footprint. Keep in mind the magazine catch itself is built for AR-15 dimensions and won't work with .308 receivers, so on an AR-10 you'd typically pair the enhanced button with your existing large-frame catch. Always confirm the fit against your specific lower before installing.
What makes the BAD magazine release button better than a standard mil-spec one?
The button is machined from tougher 7075-T6 aluminum and uses a solid concave V-groove face instead of the flat mil-spec paddle. That shape self-centers your finger and the horizontal serrations grip well without dragging, so reloads feel more positive whether you're bare-handed or wearing gloves. It's a noticeable improvement in tactile feel without adding meaningful weight.
Is the Enhanced Magazine Release Kit hard to install?
If you've swapped a magazine catch before, this is a familiar job that most builders knock out in a few minutes. The parts drop into any lower receiver that accepts a mil-spec release button, and the kit includes the spring so you have everything needed for the swap. A punch and a steady hand are about all you'll want on the bench.
Does the kit come with everything I need for the swap?
Yes, it's a complete three-piece set. You get the investment cast Enhanced Magazine Catch, the magazine catch spring, and the Enhanced Magazine Release button, so you won't need to source extra parts to finish the install on your lower.






Reviews
There are no reviews yet.