0
0

Unity Tactical ModButton Lite Crane Laser Remote Switch 4.5in FDE

UPC: 810007880556

$79.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The ModButton Lite is Unity Tactical's smaller, lighter take on the original ModButton, and this version is wired specifically for Crane-type laser ports. You get the same high-power cable and switch as the full-size unit in a trimmer package, minus the integrated mount. This one runs a 4.5-inch cable in Flat Dark Earth, which is the length most folks reach for since it comfortably spans from the top rail down to a device without leaving a bunch of extra slack flopping around.

Controls are dead simple. A press gives you momentary activation and a double tap locks it into constant-on, so you can flip your laser on and leave it running when the situation calls for it. The plug follows the MIL-STD Crane spec, which means it drops into most standard laser ports from L-3Harris, Steiner, B.E. Meyers, and Wilcox Industries. If you're running an NGAL, DBAL, PEQ, or similar Crane-spec unit, this is the switch that talks to it.

What Sets the ModButton Lite Apart

Older legacy switches often can't pass the current that current-gen lights and lasers actually pull, and that can knock output down noticeably. Unity built the ModButton Lite around a patented design and updated electronics to move full power through the cable, so your device runs the way the manufacturer intended instead of choking on a bottleneck.

Built to Take a Beating

The body is injection-molded and fully potted, meaning the internals are sealed in resin for real protection against moisture, dust, and impact. At right around 1.3 inches square and roughly a third of an inch thick, it stays low and out of the way on a handguard. It clamps to MIL-STD M1913 Picatinny rail out of the box, and if you run M-LOK, Unity offers a separate mounting kit to adapt it.

The package includes the switch along with the Picatinny mounting rail and hardware. This is a laser switch, so no light tailcap is bundled in. It's a clean, purpose-built way to add reliable, gloved-friendly control of your Crane laser to a modern setup.

Key Specifications

  • Manufacturer: Unity Tactical
  • Model: ModButton Lite
  • Manufacturer Part Number: MBL-FDE-CL-4.5
  • UPC: 810007880556
  • Color: Flat Dark Earth (FDE)
  • Product Type: Remote Switch
  • Cable Length: 4.5 inches
  • Plug Type: MIL-STD Crane-Spec Laser
  • Activation: Press for momentary, double tap for constant-on
  • Material: Injection-molded polymer, fully potted
  • Mount Type: MIL-STD M1913 Picatinny rail clamp
  • Laser Compatibility: Most L-3Harris, Steiner, B.E. Meyers, Wilcox Industries
  • Dimensions: Approx. 1.3 x 1.3 x 0.4 in

What’s Included

  • ModButton Lite Crane Laser remote switch (4.5in cable, FDE)
  • Picatinny (M1913) mounting rail
  • Mounting hardware

Frequently Asked Questions

What lasers does the ModButton Lite Crane Laser version work with?

It uses a MIL-STD Crane-spec plug, so it fits most standard Crane-type laser ports. That covers a wide range of units from L-3Harris, Steiner, B.E. Meyers, and Wilcox Industries, including popular models like the NGAL, PEQ, and DBAL. If your laser runs a standard Crane port, this switch will connect to it.

Does the ModButton Lite do constant-on or just momentary?

This Crane Laser version gives you both. A single press activates momentary for as long as you hold it, and a double tap kicks it into constant-on so your laser stays lit without keeping pressure on the button. That flexibility is handy when you want to set it and leave it running.

Why choose the 4.5-inch cable over the 7-inch?

For most setups the 4.5-inch length is the go-to because it reaches comfortably from the top rail to your device without leaving extra cable to manage. The 7-inch is there for longer runs or unusual placements. If you're mounting on a standard handguard, 4.5 inches usually hits the sweet spot.

Does it come with a mount, and can I run it on M-LOK?

It ships with a Picatinny (M1913) rail clamp and hardware, so it's ready to go on any Pic rail out of the box. It does not include an integrated mount for M-LOK, but Unity Tactical offers a separate M-LOK mounting kit if that's your setup. Just note the M-LOK adapter is sold separately.

Additional information

UPC

810007880556

Manufacturer

Manufacturer Part Number

MBL-FDE-CL-4.5

Color

Flat Dark Earth

Model

Product Type

Remote Switch

Reviews

There are no reviews yet.

Be the first to review “Unity Tactical ModButton Lite Crane Laser Remote Switch 4.5in FDE”