Description
If you have ever cleaned a rifle with three separate bottles lined up on the bench, you already know why a good CLP earns its spot in the range bag. Pro-Shot 1-Step is a synthetic all-in-one that cleans, lubricates, and protects with a single application. Saturate the bore or chamber, let it sit for ten to fifteen minutes while the penetrating agents break down buildup, then run a brush and finish with dry patches. That is the whole routine.
The formula pulls out lead, powder, plastic wad residue, copper jacket fouling, and primer fouling, which covers just about everything you'll run into whether you're maintaining a shotgun, a rimfire plinker, or a jacketed centerfire rifle. Because it's built on a non-hazardous, bio-friendly blend, it's easier to live with at an indoor bench or a kitchen table than the harsh-smelling solvents a lot of us grew up on.
What Makes 1-Step CLP a One-and-Done Job
The part that saves the most time is the built-in corrosion protection. Rust inhibitors and special additives soak into the metal and leave behind a barrier, so there's no need to go back over everything with a separate gun oil once you're finished. It also frees up stiff actions, helps quiet down jamming, and works loose parts that have started to seize from neglect or moisture.
Getting the Most Out of Your Pro-Shot 1-Step Bottle
Repeated use is where this stuff really shines. Each cleaning leaves a little protective conditioning behind, so bores and actions get easier to clean over time and hold onto less fouling with every trip. The 8 oz bottle is the practical size for anyone who cleans regularly or keeps more than a couple of guns, and it's the same CLP Pro-Shot packs into their classic cleaning kits. Made in the USA.
Key Specifications
- Manufacturer: Pro-Shot
- Model: 1-Step CLP
- Manufacturer Part Number: 1STEP-8
- UPC: 709779800278
- Product Type: Cleaner / Lubricant / Protectant (CLP)
- Size: 8 oz
- Form: Liquid
- Base: Synthetic
- Dispenser: Bottle
- Removes: Lead, powder, plastic, copper (jacketed), and primer fouling
- Suitable For: Firearms
- Made In: USA
- Quantity: 1
What’s Included
- One 8 oz bottle of Pro-Shot 1-Step CLP Cleaner, Lubricant & Protectant
Frequently Asked Questions
Do I still need to oil my gun after using Pro-Shot 1-Step CLP?
No, that's the whole point of a CLP. Pro-Shot 1-Step already contains rust inhibitors and additives that soak into the metal and leave a corrosion barrier behind. Once you've cleaned and wiped down, you're done, no separate gun oil step required.
What kind of fouling does the 1-Step CLP remove?
It handles lead, powder, plastic wad residue, copper jacket fouling, and primer fouling. That range makes it a good fit for rifles, pistols, and shotguns alike. For heavier copper buildup, letting it soak longer before brushing gives it more time to work.
How do I use Pro-Shot 1-Step CLP?
Saturate the bore or chamber, then let the penetrating agents sit for ten to fifteen minutes, or even overnight in a gun vise for a stubborn barrel. Run a brush through to break the fouling loose, then finish with a jag and dry patches until they come out clean. No follow-up oiling needed.
Is Pro-Shot 1-Step CLP safe to use indoors?
It's a synthetic, non-hazardous, bio-friendly formula, so it's much more pleasant to work with at an indoor bench than older heavy-solvent cleaners. Good ventilation is always smart, but the low-odor blend makes routine cleaning at home a lot easier to stomach.



Reviews
There are no reviews yet.