Description
The Springfield Armory M2 Bipod is the company's take on the original USGI M2 bipod that shipped with the M14 service rifle back in the day. Instead of hanging a modern bipod off a rail or swivel stud, this one clamps directly around the gas cylinder up front, which is exactly how the military did it. That means no rails, no adapters, and no drilling holes in a nice walnut or fiberglass stock. It's built from carbon steel with a black protective finish, so it carries real heft and shrugs off rough handling in the field.
Why the M2 Bipod Clamps to the Gas Cylinder
The gas cylinder mount pushes the support point as far forward as it'll go, which gives you a wide, stable stance for prone and bench work. The legs adjust individually for height, run roughly 12 to 16 inches, and cant to level up on uneven ground. When you're done, the legs fold back flat against the rifle for carry and storage. Plan on hand-tightening the clamp for a snug fit. A 3/8-inch six-point socket helps you cinch it down straight and get the front lip seated ahead of the gas lock the way it's meant to sit.
Fitment Notes for the Springfield M2 Bipod
This fits standard M1A and M14 rifles, including Standard, Loaded, National Match, and Scout Squad variants, and it'll work on many Norinco M14 clones too. It does not fit SOCOM 16 rifles, which have a shorter gas system with no room for the clamp. Weight lands right around 14 ounces, so it adds real presence up front without turning your rifle into a boat anchor.
Folks running these report noticeably tighter groups once they settle in behind the rifle, since a consistent front rest takes a lot of the wobble out of the equation. It's the go-to choice for anyone building a retro M14 clone, shooting vintage rifle matches, or just wanting that authentic BAR-style silhouette on their M1A.
Key Specifications
- Manufacturer: Springfield Armory
- Model: M2
- Manufacturer Part Number: MA5015
- UPC: 706397852306
- Product Type: Bipod
- Fits: M1A and M14 (Standard, Loaded, National Match, Scout Squad)
- Mounting: Clamps directly to gas cylinder, no gunsmithing
- Construction: Carbon steel
- Finish/Color: Black
- Leg Height Range: Approximately 12 to 16 inches
- Weight: Approximately 14 ounces
- Not Compatible With: SOCOM 16 rifles
What’s Included
- Springfield Armory M2 Bipod (MA5015)
Frequently Asked Questions
Does the M2 Bipod require gunsmithing or rails to install?
No. The M2 Bipod clamps directly around the gas cylinder using the same mounting point as the original USGI design, so there's no drilling, no rail, and no permanent modification to your rifle. Most folks get it on and off tool-free, though a 3/8-inch six-point socket makes cinching the locking nut down straight a lot easier.
Will the Springfield M2 Bipod fit my SOCOM 16?
It will not. The SOCOM 16 uses a shorter gas system that doesn't leave room for the M2's clamp. This bipod is made for standard-length M1A and M14 rifles, including the Standard, Loaded, National Match, and Scout Squad models, and it works on many Norinco M14 clones as well.
Does clamping to the gas cylinder hurt accuracy?
The gas cylinder mount is the traditional GI method, and in practice most people see their groups tighten up because a steady front rest beats freehand or an unsupported hold every time. A consistent point of contact and less shooter wobble usually translate to better shot placement. It's worth noting the clamp can leave contact marks on the gas cylinder finish, which is normal for this design.
Do the M2 Bipod legs adjust and fold?
Yes. Each leg adjusts individually for height across roughly a 12 to 16 inch range and cants to level out on uneven terrain. When you're finished shooting, the legs fold back flat against the rifle for carry and storage.




Reviews
There are no reviews yet.