Description
The Mission First Tactical Tekko Metal AR-15 Carbine Integrated Rail System is one of the easiest ways to upgrade a standard carbine without pulling out a full toolbox. It swaps your rattly polymer factory handguard for a lightweight 6061 aluminum unit that installs in a matter of minutes. There are no screws to fuss with and no permanent changes to your rifle, since the whole assembly is held in place by your existing delta ring and handguard cap. If you can take off your factory handguard, you can put this one on.
What the Tekko Metal AR Carbine Rail Brings to the Table
This is a true quad rail setup with four MIL-STD 1913 Picatinny surfaces, giving you plenty of real estate for vertical grips, weapon lights, lasers, bipods, and whatever else you like to run. The continuous monolithic top rail is the standout here. It runs flush with the upper receiver and eliminates the gap you get with two-piece handguards, so a rail-mounted optic or your backup irons stay in one straight, uninterrupted plane. That makes co-witnessing and running a red dot up front a lot cleaner.
Built to Take a Beating
The Tekko Metal rail is machined from 6061 aluminum and finished in a Type 3 hard coat anodize, which is about as tough as anodizing gets for handling heat, holster wear, and years of range time. It also includes four QD sling mounts, two on each side, so lefties and righties can both set up a push-button sling exactly how they want it. At roughly 12 ounces it keeps things light up front while still feeling far more rigid than any plastic forend.
Made in the USA and backed by MFT's lifetime warranty, this is a straightforward, no-drama upgrade for anyone who wants Picatinny mounting space and a sturdier feel without floating the barrel or replacing the barrel nut. It fits standard AR-15, M4, and M16 carbine configurations built around a 7-inch handguard length.
Key Specifications
- Manufacturer: Mission First Tactical
- Model: Tekko
- Manufacturer Part Number: TMARCIRS
- UPC: 676315029014
- Product Type: AR Drop-In Rail System
- Fit: AR-15 / M4 / M16 Carbine
- Length: 7 inches (7.25 in overall)
- Rail Interface: Four MIL-STD 1913 Picatinny rails
- Top Rail: Monolithic continuous top rail
- Material: 6061 Aluminum
- Finish: Black, Type 3 Hard Coat Anodized
- Sling Mounts: Four QD points, two per side
- Installation: Drop-in, screwless (delta ring and handguard cap)
- Weight: Approx. 12 oz
- Origin: Made in USA
- Warranty: MFT Lifetime Warranty
What’s Included
- MFT Tekko Metal AR-15 Carbine 7-inch Drop-In Integrated Rail System (Black)
Frequently Asked Questions
Does installing the Tekko Metal drop-in rail require gunsmithing?
No. This is a screwless, drop-in design that uses your rifle's existing delta ring and handguard cap to hold it in place. You remove your factory polymer handguard and slot this one in, usually in just a few minutes with no permanent changes to your rifle.
Will this 7-inch Tekko rail fit my AR-15?
It's built for standard AR-15, M4, and M16 carbine setups that use a 7-inch factory handguard with a front sight base and delta ring. If your rifle currently wears a two-piece carbine-length plastic handguard, this is a direct swap. It is not designed for free-float builds or mid-length handguard setups.
Is the Tekko Metal rail free-floating?
No, this is a non-free-floating drop-in rail. It anchors to the delta ring and handguard cap rather than a replacement barrel nut, which is exactly what makes it so quick to install. If you specifically want a free-float design, MFT offers a separate free-floating Tekko option.
Can I mount a red dot or optic on the top rail?
Yes. The continuous monolithic top rail sits flush with the upper receiver and removes the gap you'd normally see between the two, so an optic or front sight stays on one straight plane. That makes co-witnessing irons and running a forward-mounted red dot a lot more reliable.







Reviews
There are no reviews yet.