Description
The Wheeler FAT Stix Limiter takes the second-guessing out of torquing hardware in the field or at the bench. This one is preset to 65 in-lb, so there's nothing to dial in or calibrate. You just drop it onto your driver, tighten until it stops, and trust that the fastener hit the number it was supposed to. It's the kind of simple, do-one-thing-well tool that ends up living in your gear bag because it saves you from stripped screws and loose mounts down the road.
What the 65 in-lb FAT Stix Does Best
The 65 in-lb value is the top of the FAT Stix range, which makes it the go-to for higher-torque jobs like base screws, action screws, and heavier mounting hardware where a firm, repeatable pull matters. Wheeler rates these limiters as accurate to within 5%, and each one is clearly marked so there's no mixing them up when you have a few in the drawer. The coated steel body shrugs off regular handling and stays readable after plenty of use.
Pairing the FAT Stix Limiter With Your Driver
This limiter works with the Wheeler FAT Stix T-Handle Driver or any driver that accepts standard 1/4-inch hex bits, so it slots right into a kit you may already own. Grab the bit your fastener needs, seat it in the limiter, and go. Because the limiters are sold individually, you can build out exactly the torque values you use most instead of paying for a set full of numbers you'll never touch.
Small Enough to Always Have On Hand
The compact size is a big part of the appeal. This thing disappears into a range bag, a pack, or a corner of the workbench and weighs next to nothing, which means it's there when you're mounting an optic at the range or doing quick maintenance away from the shop. For anyone who cares about doing the job right the first time, a preset limiter beats eyeballing it every single time.
Key Specifications
- Manufacturer: Wheeler Engineering
- Model: FAT Stix Limiter
- Manufacturer Part Number: 1192775
- UPC: 661120747253
- Preset Torque Value: 65 in-lb (7.3 Nm)
- Accuracy: +/- 5%
- Drive Compatibility: 1/4-inch hex bits
- Color: Black
- Material: Coated steel
- Product Type: Torque Limiter
- Shipping Weight: 0.355 lb
What’s Included
- (1) Wheeler FAT Stix Limiter preset to 65 in-lb
Frequently Asked Questions
Does the FAT Stix Limiter come with a driver or bits?
No, this is the individual 65 in-lb limiter sold on its own. It's designed to work with the Wheeler FAT Stix T-Handle Driver or any driver that accepts standard 1/4-inch hex bits. If you already have a driver and bits, this just adds the torque value you need.
How accurate is the 65 in-lb FAT Stix Limiter?
Wheeler rates these limiters as accurate to within plus or minus 5% of the marked value. For scope bases, action screws, and general firearm maintenance, that's plenty precise for consistent, repeatable results. It stops right at spec so you avoid over-tightening.
Do I need to adjust or calibrate the FAT Stix Limiter?
There's no adjusting or dialing involved. The limiter is preset to 65 in-lb straight out of the package, so you just attach it to your driver, add your bit, and tighten until it stops. That preset design is what makes it so quick to grab and use.
Can I use the FAT Stix Limiter on things besides firearms?
Yes. While it's built with gunsmithing and optics work in mind, it handles any small fastener that calls for a controlled 65 in-lb. People use these for bikes, small machinery, and other precision tasks where over-tightening would cause trouble.




Reviews
There are no reviews yet.