Description
Anyone who has mounted a scope knows the two-way stress of getting ring cap screws right. Too loose and your optic walks under recoil, too tight and you risk crushing the tube or stripping threads. The Wheeler FAT Stix Torque Limiter takes that whole guessing game off the table. It comes preset to 20 in-lb straight from the factory, so there's no dial to set and no chart to double-check. You slip it between your driver and bit, tighten until it clicks, and you're done.
Where the 20 in-lb FAT Stix Earns Its Keep
That 20 in-lb value lands right in the sweet spot for a lot of common jobs. Ring cap screws typically want somewhere in the 15 to 20 in-lb range, and plenty of scope and ring makers spec exactly 20. It's also a solid number for red dot mounts, base screws on lighter setups, and all kinds of small firearm fasteners where over-cranking does real damage. Accurate to within +/-5%, it delivers the kind of repeatable, even torque that keeps a rifle holding zero session after session.
How the FAT Stix Limiter Fits Your Setup
The limiter uses a standard 1/4-inch hex interface, so it drops right into the FAT Stix T-handle driver or pretty much any driver or ratchet that takes 1/4-inch bits. The torque rating is stamped clearly on the tool, which matters when you've got a few different limiters in the range bag and need to grab the right one fast. It's compact, coated for durability, and small enough to toss in a pack for adjustments at the bench or out in the field.
For folks building multiple rifles or swapping optics often, having a dedicated 20 in-lb stick beats digging through a bulky adjustable wrench every time. Match the limiter to the manufacturer's spec, click it home, and move on with confidence.
Key Specifications
- Torque Value: 20 in-lb (preset)
- Accuracy: +/- 5%
- Drive Interface: 1/4-inch hex
- Style: Torque Limiter
- Adjustment: None required (fixed value)
- Color: Black
- Model: FAT Stix Limiter
- Manufacturer: Wheeler Engineering
- Manufacturer Part Number: 1192766
- UPC: 661120747161
- Shipping Weight: 0.333 lb
- Product Type: Tool
What’s Included
- Wheeler FAT Stix 20 in-lb Torque Limiter
Frequently Asked Questions
What does the FAT Stix Torque Limiter work with?
It uses a standard 1/4-inch hex interface, so it pairs with the Wheeler FAT Stix T-handle driver or any driver, ratchet, or handle that accepts 1/4-inch bits. You place the limiter between your driver and the bit, then tighten until it clicks off. That makes it easy to fold into a setup you already own.
Is 20 in-lb the right torque for my scope rings?
Twenty in-lb is a very common spec for ring cap screws, with many optics and ring makers calling for the 15 to 20 in-lb range. Always check your ring and scope manufacturer's recommendation first, since some setups differ. If your spec matches 20, this limiter takes all the guesswork out.
Do I need to set or adjust the FAT Stix Limiter?
No adjustments at all. It comes preset to 20 in-lb from the factory and stays there, which is the whole point of the design. You just grab it and go, with no dial to dial in and no chart to reference.
How accurate is the FAT Stix 20 in-lb limiter?
It's rated accurate to within +/-5% of its 20 in-lb setting, which is plenty tight for scope mounting and small firearm fasteners. That consistency is what helps a rifle hold zero over repeated sessions. Storing it at room temperature and treating it well keeps it performing over the long haul.





Reviews
There are no reviews yet.