Description
The XS Lever Rail Ghost Ring WS was built to take the affordable, hard-working Rossi R95 .30-30 and open up a whole new world of optic options. The rail is machined from aircraft-grade aluminum to true Picatinny specs, then hard coat anodized to shrug off drops, weather, and years of recoil. Bolt it directly over the receiver for a traditional scope, or slide your optic forward for a scout scope or red dot when you want a fast, both-eyes-open sight picture. The rail replaces the factory rear sight, so you get a clean mounting platform without giving up your irons.
What the Ghost Ring Setup Brings to Your R95
The rear ghost ring is precision-machined steel and fully adjustable for both windage and elevation, so you can dial in a solid zero and trust it to stay put. It ships with two apertures, a .230-inch and a .191-inch inside diameter. The larger ring pulls in more light for dawn and dusk hunting and gives you a wide, fast field of view, while the smaller aperture tightens things up for precision work in bright daylight. Swapping between them takes just a minute and lets you tune the rifle to how and where you shoot.
The White Stripe Front Sight Advantage
The WS in the name stands for White Stripe, and it earns its keep. This front sight replaces the factory blade and ramp with a blued steel body wearing a painted white stripe face. That white-on-black post jumps out against brush, hide, or a dark treeline, giving you a high-contrast aiming point in just about any lighting. Paired with the ghost ring rear, it makes for one of the quickest iron sight setups you can put on a lever gun.
Fit and Setup Notes for the Rossi R95
This kit is made specifically for the Rossi R95 in .30-30 with a round barrel and the factory front sight blade and ramp screwed to the barrel. It is a DIY-friendly install, though it pays to follow the directions and torque the screws to spec at 20 inch-pounds. XS builds these in Fort Worth, Texas, and backs them with a limited lifetime warranty, so it is an upgrade you can set and forget.
Key Specifications
- Manufacturer: XS Sights
- MPN: TS-1001-5
- UPC: 647533001069
- Model: Lever Rail
- Fits: Rossi R95 .30-30, round barrel with factory front blade and ramp
- Rail Style: Picatinny spec
- Product Type: 1 Piece Base
- Rear Sight: Adjustable ghost ring, windage and elevation
- Aperture Sizes: .230 in and .191 in inside diameter
- Front Sight: White Stripe blued steel post
- Rail Material: Hard anodized aircraft-grade aluminum
- Sight Material: Precision-machined steel
- Color / Finish: Black matte
- Length: 13.45 in
- Install Torque: 20 inch-pounds
- Warranty: Limited lifetime
What’s Included
- XS Picatinny lever rail
- Adjustable ghost ring rear sight
- White Stripe front sight
- Two apertures (.230 in and .191 in inside diameter)
- Mounting hardware
- Installation instructions
Frequently Asked Questions
Will the XS Lever Rail Ghost Ring WS fit my Rossi R95?
It is designed for the Rossi R95 chambered in .30-30 with a round barrel and the factory front sight blade and ramp screwed to the barrel. It does not fit Rossi rifles chambered in .45-70, so check your caliber and barrel before ordering. As long as you have the standard round-barrel .30-30, you are good to go.
Can I mount both a scope and use the ghost ring sights?
The Picatinny rail lets you mount a traditional scope over the receiver or slide a scout scope or red dot forward for better eye relief. The ghost ring rear and white stripe front give you rugged backup irons, which is handy if your optic goes down or you want a quick close-range setup. You will need to pick rings that match your chosen optic since the kit does not include them.
What is the difference between the two apertures included?
The kit comes with a .230-inch and a .191-inch inside diameter aperture. The larger ring gathers more light and gives a wider, faster field of view for low-light hunting at dawn and dusk. The smaller one tightens up your sight picture for more precise shooting in bright daylight, and swapping between them only takes a moment.
Is the XS Lever Rail hard to install?
It is a DIY-friendly job for most folks with basic tools. You remove the factory rear sight and front blade and ramp, then mount the rail and sights, torquing the screws to 20 inch-pounds so nothing works loose under recoil. Follow the included instructions closely, and keep in mind that moving to the new sights means you will want to re-zero at the range.




Reviews
There are no reviews yet.