0
0

Blackhawk A.R.C. IWB Holster for S&W M&P Shield 9mm/.40 – Urban Gray

UPC: 604544615593

$24.95

19 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Appendix carry has a reputation for being uncomfortable, and the Blackhawk A.R.C. was designed to fix that. A.R.C. stands for Appendix Reversible Carry, and the whole point of this inside-the-waistband holster is to keep your S&W M&P Shield up front, secure, and easy to reach without digging into your waistline. Instead of the hard, rigid plastic you find on a lot of holsters, Blackhawk molded this one from a softer injection-molded polymer that flexes against your body while still holding its shape for a clean one-handed reholster. It's cut specifically for the Shield 9mm/.40 and covers the Shield 2.0 and Shield Plus variants too.

What Makes the A.R.C. Carry Different

The polymer here is the story. It's stiffer than rubber but noticeably more forgiving than Kydex, so it doesn't poke or press the way a hard shell can during a full day of sitting, standing, and moving around. A nice side benefit of the molded polymer is a quieter draw and reholster, without the squeak and rub you get from harder materials. The edges are rounded and cleaned up, so there's nothing sharp riding against your skin.

Dialing In the Fit

Retention is handled by a passive detent with a single adjustment screw, so you can tighten or loosen the hold to match your preference. Some folks find they need to snug that screw down a bit to get the retention where they want it, but once it's set, you get a secure hold and a smooth draw. The holster ships fully ambidextrous and reversible, so left or right hand carry is just a matter of swapping the clip over.

Belt Setup and Everyday Wear

Two belt clips come in the box, sized for 1.5-inch and 1.75-inch belts, and both offer cant and ride-height adjustment so you can fine-tune your carry angle and how deep it sits. The slim shell keeps printing down under a shirt, and the body shape leaves room for a rear-mounted red dot if your Shield is running an optic. Made in the USA, it's a straightforward, well-built rig for daily concealed carry.

Key Specifications

  • Manufacturer: Blackhawk
  • Model: A.R.C. (Appendix Reversible Carry)
  • Manufacturer Part Number: 417563UG
  • UPC: 604544615593
  • Fits: S&W M&P Shield 9/.40, Shield 2.0, Shield Plus
  • Product Type: Inside-the-Waistband (IWB) Holster
  • Carry Style: Appendix / Reversible, Ambidextrous
  • Material: Soft Injection-Molded Polymer
  • Color: Urban Gray
  • Retention: Passive detent with adjustment screw
  • Mount Type: Belt Clip
  • Belt Compatibility: 1.5" and 1.75" belts
  • Optic Compatible: Yes, accommodates rear-mounted red dots
  • Country of Origin: Made in USA

What’s Included

  • Blackhawk A.R.C. IWB holster shell (Urban Gray)
  • 1.5" belt clip
  • 1.75" belt clip
  • Retention adjustment screw

Frequently Asked Questions

Which pistols does the Blackhawk A.R.C. holster fit?

This model is molded for the S&W M&P Shield in 9mm and .40, and it also fits the Shield 2.0 and Shield Plus. If your Shield is running a rear-mounted red dot, the body shape leaves room for it. It's cut for this specific frame, so it won't work as a universal fit for other pistols.

Can I carry with the A.R.C. holster left-handed?

Yes. The A.R.C. is fully ambidextrous and reversible, so it works for both left and right hand carry. You just move the belt clip to the opposite side to switch it over, no separate holster needed.

Is the retention adjustable, and does it hold the gun securely?

Retention uses a passive detent with a single screw you can tighten or loosen with a Phillips screwdriver. Some carriers find they need to snug the screw down a bit to get a firm hold, but once dialed in it locks the pistol in place with a smooth, easy draw. The soft-polymer design is stiff enough for one-handed reholstering.

Will the A.R.C. fit my belt?

It ships with two clips, one sized for a 1.5-inch belt and one for a 1.75-inch belt, so most everyday gun belts are covered. Both clips also let you adjust cant and ride height, so you can tune the carry angle and how deep the holster sits in your waistband.

Additional information

UPC

604544615593

Manufacturer

Manufacturer Part Number

417563UG

Color

Urban Gray

Length

8.0500

Model

Mount Type

Belt Clip

Product Type

Inside Waistband Holster

Shipping Weight

0.415

Reviews

There are no reviews yet.

Be the first to review “Blackhawk A.R.C. IWB Holster for S&W M&P Shield 9mm/.40 – Urban Gray”